Thread overview | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
|
December 06, 2006 Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
I'm trying to build Apple's "Universal" gcc-5363, but somehow it always fails in the install phase ? gnumake install RC_OS=macos RC_ARCHS='i386 ppc' TARGETS='i386 ppc' \ SRCROOT=`pwd` OBJROOT=`pwd`/build/obj \ DSTROOT=`pwd`/build/dst SYMROOT=`pwd`/build/sym I added "d" to the --enable-languages in build_gcc, otherwise it is using the GCC settings Apple chose. Tried building GDC 0.19 with gcc-5341 earlier, but didn't have much luck with that effort either... :( Downloaded the GCC source code tarball from Apple, and added the "d" directory and ran "setup-gcc.sh" http://www.opensource.apple.com/darwinsource/tarballs/other/gcc-5363.tar.gz http://www.opensource.apple.com/darwinsource/tarballs/other/gcc-5341.tar.gz How did you build gdc-0.19-macos-universal.tar.bz2 ? I would like to build a compiler from GDC SVN trunk. --anders |
December 06, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to Anders F Björklund | Actually, a step-by-step process (configure included) of the build process would be very appreciated!
---
Paolo Invernizzi
Anders F Björklund wrote:
> I'm trying to build Apple's "Universal" gcc-5363,
> but somehow it always fails in the install phase ?
>
> gnumake install RC_OS=macos RC_ARCHS='i386 ppc' TARGETS='i386 ppc' \
> SRCROOT=`pwd` OBJROOT=`pwd`/build/obj \
> DSTROOT=`pwd`/build/dst SYMROOT=`pwd`/build/sym
>
> I added "d" to the --enable-languages in build_gcc,
> otherwise it is using the GCC settings Apple chose.
>
>
> Tried building GDC 0.19 with gcc-5341 earlier, but
> didn't have much luck with that effort either... :(
>
> Downloaded the GCC source code tarball from Apple,
> and added the "d" directory and ran "setup-gcc.sh"
>
> http://www.opensource.apple.com/darwinsource/tarballs/other/gcc-5363.tar.gz
> http://www.opensource.apple.com/darwinsource/tarballs/other/gcc-5341.tar.gz
>
>
> How did you build gdc-0.19-macos-universal.tar.bz2 ?
> I would like to build a compiler from GDC SVN trunk.
>
> --anders
|
December 07, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to Anders F Björklund | Anders F Björklund wrote: > I'm trying to build Apple's "Universal" gcc-5363, > but somehow it always fails in the install phase ? > > gnumake install RC_OS=macos RC_ARCHS='i386 ppc' TARGETS='i386 ppc' \ > SRCROOT=`pwd` OBJROOT=`pwd`/build/obj \ > DSTROOT=`pwd`/build/dst SYMROOT=`pwd`/build/sym > > I added "d" to the --enable-languages in build_gcc, > otherwise it is using the GCC settings Apple chose. > > > Tried building GDC 0.19 with gcc-5341 earlier, but > didn't have much luck with that effort either... :( > > Downloaded the GCC source code tarball from Apple, > and added the "d" directory and ran "setup-gcc.sh" > > http://www.opensource.apple.com/darwinsource/tarballs/other/gcc-5363.tar.gz > http://www.opensource.apple.com/darwinsource/tarballs/other/gcc-5341.tar.gz > > > How did you build gdc-0.19-macos-universal.tar.bz2 ? > I would like to build a compiler from GDC SVN trunk. > > --anders I have only done Universal builds with gcc-5341 on MacOS Intel. The build environment on my G5 seems to be messed up so that I can't make i386 executables. gcc-5363 fails on x86_64 stuff. Hopefully, installing Xcode 2.4.1 will fix these problems (downloading now). Here are the build steps I use: src=`pwd`/gcc-5341 tar xzf .../gcc-5341.tar.gz cd $src/gcc tar xzf .../gdc-src.tar.gz cd $src ./gcc/d/setup-gcc.sh mkdir -p build/obj build/dst build/sym gnumake install RC_OS=macos RC_ARCHS='i386 ppc' TARGETS='i386 ppc' \ SRCROOT=`pwd` OBJROOT=`pwd`/build/obj DSTROOT=`pwd`/build/dst \ SYMROOT=`pwd`/build/sym >> build-log 2>&1 \ # To make the binary package... cd $src/build/obj/obj-i686-i686 $src/gcc/d/package/simple.sh --macos \ --with-install-root=$src/build/dst # The binary packages are left in /tmp The setup-gcc.sh script will add 'd' to --enable-languages. If you did this manually, the rest of the patching of build_gcc may have failed... There is a bug in that lets this patch fail, but still says "GDC setup complete." If you still get errors, please send me a log. David |
December 07, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to David Friedman | David Friedman wrote: > I have only done Universal builds with gcc-5341 on MacOS Intel. The build environment on my G5 seems to be messed up so that I can't make i386 executables. gcc-5363 fails on x86_64 stuff. Hopefully, installing Xcode 2.4.1 will fix these problems (downloading now). Thanks for the build info, will try it again on the Intel Mac... > The setup-gcc.sh script will add 'd' to --enable-languages. If you did this manually, the rest of the patching of build_gcc may have failed... There is a bug in that lets this patch fail, but still says "GDC setup complete." Hmm, wonder if I did do that for the Apple build as well as FSF ? > If you still get errors, please send me a log. Will do, and I will contribute my gdcmac/gdcwin packaging scripts. Basically it's the same, just wrapped with PackageMaker / NSIS... --anders |
December 11, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to Anders F Björklund | Anders F Björklund wrote: > David Friedman wrote: > >> I have only done Universal builds with gcc-5341 on MacOS Intel. The build environment on my G5 seems to be messed up so that I can't make i386 executables. gcc-5363 fails on x86_64 stuff. Hopefully, installing Xcode 2.4.1 will fix these problems (downloading now). > > Thanks for the build info, will try it again on the Intel Mac... > >> The setup-gcc.sh script will add 'd' to --enable-languages. If you did this manually, the rest of the patching of build_gcc may have failed... There is a bug in that lets this patch fail, but still says "GDC setup complete." > > Hmm, wonder if I did do that for the Apple build as well as FSF ? > >> If you still get errors, please send me a log. > > Will do, and I will contribute my gdcmac/gdcwin packaging scripts. > Basically it's the same, just wrapped with PackageMaker / NSIS... > > --anders I have found that the patch and method described at http://gcc.gnu.org/ml/gcc-patches/2006-09/msg00997.html allows building on PowerPC. The resulting compiler will depend on SDK (unless overridden by -isysroot.) Also, I was able to build with gcc-5363 after installing the latest Xcode (only tried it on Intel.) David |
December 11, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to David Friedman | David Friedman wrote:
>> Thanks for the build info, will try it again on the Intel Mac...
>>
> Also, I was able to build with gcc-5363 after installing the latest Xcode (only tried it on Intel.)
Yes, it built just fine now when I tried it again. The patching
for build_gcc failed (against gcc-5363), but fixed it manually.
For now I left the symlink gdc -> gdc-4.0 in the gdcmac archive,
but think I will do it in the PKG post-install script instead...
i.e. only supply gdc-4.0 and gdc-3.3 in the actual archives ?
(and gdmd wrapper too, it will follow whatever "gdc" is using)
Is there a way to relocate libgphobos.a to e.g. gcc folder,
so that you can install both of GCC 3.3 and GCC 4.0 at once ?
Thanks!
--anders
PS.
Scrapping the "10.4-intel" and "universal" gdcmac versions,
it will all go in the same 10.4 PKG/DMG version for GDC 0.20
|
December 12, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to Anders F Björklund | Anders F Björklund wrote: > David Friedman wrote: > >>> Thanks for the build info, will try it again on the Intel Mac... >>> >> Also, I was able to build with gcc-5363 after installing the latest Xcode (only tried it on Intel.) > > Yes, it built just fine now when I tried it again. The patching > for build_gcc failed (against gcc-5363), but fixed it manually. > > For now I left the symlink gdc -> gdc-4.0 in the gdcmac archive, > but think I will do it in the PKG post-install script instead... > > i.e. only supply gdc-4.0 and gdc-3.3 in the actual archives ? > (and gdmd wrapper too, it will follow whatever "gdc" is using) > > Is there a way to relocate libgphobos.a to e.g. gcc folder, > so that you can install both of GCC 3.3 and GCC 4.0 at once ? > > Thanks! > --anders > > PS. > Scrapping the "10.4-intel" and "universal" gdcmac versions, > it will all go in the same 10.4 PKG/DMG version for GDC 0.20 You can move ligphobos.a and libgphobos.spec to <prefix>/lib/gcc/<target>/<version> (where libgcc.a is). That said, I am planning to drop support for GCC 3.3 in the next (0.21) release. When I asked, I didn't get a response from anyone who was actually using it... David |
December 12, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to David Friedman | David Friedman wrote: >> Scrapping the "10.4-intel" and "universal" gdcmac versions, >> it will all go in the same 10.4 PKG/DMG version for GDC 0.20 > > You can move ligphobos.a and libgphobos.spec to <prefix>/lib/gcc/<target>/<version> (where libgcc.a is). OK, the reason it wasn't working was that I moved it to the old Apple GCC location instead of the new one I used. <duh> i.e. I moved it to /usr/lib/gcc/darwin/3.3/libgphobos.a, but it was looking in /usr/lib/gcc/powerpc-apple-darwin7/3.3.6... Works fine now. > That said, I am planning to drop support for GCC 3.3 in the next (0.21) release. When I asked, I didn't get a response from anyone who was actually using it... That should be OK, I am only using GCC 3.3 for my Mac OS X 10.3 builds and am planning to focus on Mac OS X 10.4 and 10.5 next. And if GDC 0.20 matches DMD 1.0 - then that should be valid for a while to come, I guess ? Besides, templates are broken anyway. Using C instead. --anders |
December 12, 2006 Re: Building Apple GCC with GDC | ||||
---|---|---|---|---|
| ||||
Posted in reply to Anders F Björklund | >> That said, I am planning to drop support for GCC 3.3 in the next (0.21) release. When I asked, I didn't get a response from anyone who was actually using it... > > That should be OK, I am only using GCC 3.3 for my Mac OS X 10.3 > builds and am planning to focus on Mac OS X 10.4 and 10.5 next. Another idea I've been toying around with is supplying a full GCC collection (i.e. C/C++/D) using GCC 4.0.3, for use with Mac OS X 10.2/10.3 and Windows/MinGW. Probably easier to do a vanilla FSF build for those, than using the "system" compiler ? So for the GDC 0.20 it's going to be GCC 3.3.6 / Apple gdc-5363 for Mac and MinGW GCC 3.4.2-20040916-1/3.4.5-20060117-1 for Win, but future versions might provide a full build using GCC 4.0.3 or perhaps even GCC 4.1 and 4.2 when GDC starts support those ? Will probably use /opt/gnu, and include a patched GDB as well... But it will come after wxD (and Code::Blocks) have been improved. --anders |
Copyright © 1999-2021 by the D Language Foundation