View mode: basic / threaded / horizontal-split · Log in · Help
August 21, 2012
Wiki updates
I restructured the http://gdcproject.org/wiki/Installation page, I hope
it's OK this way.

I also added a Raspberry Pi overview page
http://gdcproject.org/wiki/Raspberry Pi and a new installation guide
for raspbian
http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
would be great if someone could test the raspbian guide and report any
success or failures. It works for me, but I'm not sure if I forgot to
document some details.

@Iain the home page (http://gdcproject.org/wiki/Home) could need some
small updates:

Frontend version still says 2.059 and links to the 2.057 changelog.

There are still some references to the old issue tracker:
"A bug, proposal, or enhancement can go to the issue tracker on
bitbucket."
"This list is still maintained, however, new bugs should be submitted
to the Bitbucket repository."

And this should probably be changed to refer to git commits:
"Include the hg changeset or commit you are using for GDC. (e.g. commit
114 or changset 6f03952ff48f)"

If you give me permission to edit the home page (user JohannesPfau) I
can fix those, if not that's fine as well ;-)

BTW:
Would it be possible to add links to the gdcproject.org main page,
github repository, bug tracker and D.gnu forum to the wiki Quick links
list?
August 22, 2012
Re: Wiki updates
On Tuesday, 21 August 2012 at 19:01:17 UTC, Johannes Pfau wrote:
> I restructured the http://gdcproject.org/wiki/Installation 
> page, I hope
> it's OK this way.
>
> I also added a Raspberry Pi overview page
> http://gdcproject.org/wiki/Raspberry Pi and a new installation 
> guide
> for raspbian
> http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
> would be great if someone could test the raspbian guide and 
> report any
> success or failures. It works for me, but I'm not sure if I 
> forgot to
> document some details.
>
> @Iain the home page (http://gdcproject.org/wiki/Home) could 
> need some
> small updates:
>
> Frontend version still says 2.059 and links to the 2.057 
> changelog.
>
> There are still some references to the old issue tracker:
> "A bug, proposal, or enhancement can go to the issue tracker on
> bitbucket."
> "This list is still maintained, however, new bugs should be 
> submitted
> to the Bitbucket repository."
>
> And this should probably be changed to refer to git commits:
> "Include the hg changeset or commit you are using for GDC. 
> (e.g. commit
> 114 or changset 6f03952ff48f)"
>
> If you give me permission to edit the home page (user 
> JohannesPfau) I
> can fix those, if not that's fine as well ;-)
>
> BTW:
> Would it be possible to add links to the gdcproject.org main 
> page,
> github repository, bug tracker and D.gnu forum to the wiki 
> Quick links
> list?


Fixed them - mostly.  I see a bit of spam has creeped in (oh 
noes!).  This might take me an hour to clean out as I can't seem 
to remove pages in bulk.

In the meantime, I have added some silly textcha's - so sorry for 
the inconvenience!

I could certainly add you to an admin group if only I knew how. 
:-)

Regards
Iain
August 22, 2012
Re: Wiki updates
On Wednesday, 22 August 2012 at 13:51:12 UTC, Iain Buclaw wrote:
> On Tuesday, 21 August 2012 at 19:01:17 UTC, Johannes Pfau wrote:
>> I restructured the http://gdcproject.org/wiki/Installation 
>> page, I hope
>> it's OK this way.
>>
>> I also added a Raspberry Pi overview page
>> http://gdcproject.org/wiki/Raspberry Pi and a new installation 
>> guide
>> for raspbian
>> http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
>> would be great if someone could test the raspbian guide and 
>> report any
>> success or failures. It works for me, but I'm not sure if I 
>> forgot to
>> document some details.
>>
>> @Iain the home page (http://gdcproject.org/wiki/Home) could 
>> need some
>> small updates:
>>
>> Frontend version still says 2.059 and links to the 2.057 
>> changelog.
>>
>> There are still some references to the old issue tracker:
>> "A bug, proposal, or enhancement can go to the issue tracker on
>> bitbucket."
>> "This list is still maintained, however, new bugs should be 
>> submitted
>> to the Bitbucket repository."
>>
>> And this should probably be changed to refer to git commits:
>> "Include the hg changeset or commit you are using for GDC. 
>> (e.g. commit
>> 114 or changset 6f03952ff48f)"
>>
>> If you give me permission to edit the home page (user 
>> JohannesPfau) I
>> can fix those, if not that's fine as well ;-)
>>
>> BTW:
>> Would it be possible to add links to the gdcproject.org main 
>> page,
>> github repository, bug tracker and D.gnu forum to the wiki 
>> Quick links
>> list?
>
>
> Fixed them - mostly.  I see a bit of spam has creeped in (oh 
> noes!).  This might take me an hour to clean out as I can't 
> seem to remove pages in bulk.
>
> In the meantime, I have added some silly textcha's - so sorry 
> for the inconvenience!
>
> I could certainly add you to an admin group if only I knew how. 
> :-)
>
> Regards
> Iain


OK, worked out how to remove them in bulk.  If anyone was zealous 
enough to create a page in their own name, I'm sorry but you've 
have your account removed. :P
August 22, 2012
Re: Wiki updates
Am 21.08.2012 21:01, schrieb Johannes Pfau:
> I restructured the http://gdcproject.org/wiki/Installation page, I hope
> it's OK this way.
>
> I also added a Raspberry Pi overview page
> http://gdcproject.org/wiki/Raspberry Pi and a new installation guide
> for raspbian
> http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
> would be great if someone could test the raspbian guide and report any
> success or failures. It works for me, but I'm not sure if I forgot to
> document some details.

Thanks a lot for this - it would have taken ages for me to trace that 
stuff down.

Not sure if this is necessary, but I also installed 'patchutils' because 
"rules clean" complained about 'lsdiff' missing.

However, I'm now still getting the error below.

PS: the wiki page seems to have been deleted during the spam clean up. 
If you need the contents of the raspian_hardfloat page, the page is 
still open in my browser so I can still copy them out.

---

(...)
arm-linux-gnueabihf-gcc -c   -g -O2 -DIN_GCC   -W -Wall -Wwrite-strings 
-Wcast-qual -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros 
-Wno-overlength-strings -Wold-style-definition -Wc++-compat -fno-common 
 -DHAVE_CONFIG_H -I. -Ilto -I../../../gcc-4.7-4.7.1/src/gcc 
-I../../../gcc-4.7-4.7.1/src/gcc/lto 
-I../../../gcc-4.7-4.7.1/src/gcc/../include 
-I../../../gcc-4.7-4.7.1/src/gcc/../libcpp/include 
-I../../../gcc-4.7-4.7.1/src/gcc/../libdecnumber 
-I../../../gcc-4.7-4.7.1/src/gcc/../libdecnumber/dpd -I../libdecnumber 
  ../../../gcc-4.7-4.7.1/src/gcc/lto/lto-object.c -o lto/lto-object.o
arm-linux-gnueabihf-gcc   -g -O2 -DIN_GCC   -W -Wall -Wwrite-strings 
-Wcast-qual -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros 
-Wno-overlength-strings -Wold-style-definition -Wc++-compat -fno-common 
 -DHAVE_CONFIG_H  -o lto1 \
		lto/lto-lang.o lto/lto.o lto/lto-object.o attribs.o main.o 
tree-browser.o libbackend.a libcommon-target.a libcommon.a 
../libcpp/libcpp.a ../libdecnumber/libdecnumber.a   -lmpc -lmpfr -lgmp 
-rdynamic -ldl  -lz libcommon.a ../libcpp/libcpp.a 
../libiberty/libiberty.a ../libdecnumber/libdecnumber.a
(echo "@set version-GCC 4.7.1"; \
	 if [ "" = "experimental" ]; \
	 then echo "@set DEVELOPMENT"; \
	 else echo "@clear DEVELOPMENT"; \
	 fi) > gcc-vers.texiT
echo @set srcdir 
/home/pi/develop/GDC/objdir/gcc/../../../gcc-4.7-4.7.1/src/gcc >> 
gcc-vers.texiT
if [ -n "(GCC) " ]; then \
	  echo "@set VERSION_PACKAGE (GCC) " >> gcc-vers.texiT; \
	fi
echo "@set BUGURL @uref{http://gcc.gnu.org/bugs.html}" >> gcc-vers.texiT; \
	mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gcc.pod
perl ../../../gcc-4.7-4.7.1/src/gcc/../contrib/texi2pod.pl 
../../../gcc-4.7-4.7.1/src/gcc/doc/invoke.texi > gcc.pod
No filename or title
make[2]: [gcc.pod] Error 255 (ignored)
echo timestamp > doc/gcc.1
(pod2man --center="GNU" --release="gcc-4.7.1" --date=2012-06-14 
--section=1 gcc.pod > doc/gcc.1.T$$ && \
		mv -f doc/gcc.1.T$$ doc/gcc.1) || \
		(rm -f doc/gcc.1.T$$ && exit 1)
echo timestamp > gpl.pod
perl ../../../gcc-4.7-4.7.1/src/gcc/../contrib/texi2pod.pl 
../../../gcc-4.7-4.7.1/src/gcc/doc/include/gpl_v3.texi > gpl.pod
echo timestamp > doc/gpl.7
(pod2man --center="GNU" --release="gcc-4.7.1" --date=2012-06-14 
--section=7 gpl.pod > doc/gpl.7.T$$ && \
		mv -f doc/gpl.7.T$$ doc/gpl.7) || \
		(rm -f doc/gpl.7.T$$ && exit 1)
rm gcc.pod
make[2]: Leaving directory `/home/pi/develop/GDC/objdir/gcc'
Checking multilib configuration for libgcc...
mkdir -p -- arm-linux-gnueabihf/libgcc
Configuring in arm-linux-gnueabihf/libgcc
configure: creating cache ./config.cache
checking build system type... arm-unknown-linux-gnueabihf
checking host system type... arm-unknown-linux-gnueabihf
checking for --enable-version-specific-runtime-libs... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for gawk... mawk
checking for arm-linux-gnueabihf-ar... ar
checking for arm-linux-gnueabihf-lipo... lipo
checking for arm-linux-gnueabihf-nm... /home/pi/develop/GDC/objdir/./gcc/nm
checking for arm-linux-gnueabihf-ranlib... ranlib
checking for arm-linux-gnueabihf-strip... strip
checking whether ln -s works... yes
checking for arm-linux-gnueabihf-gcc... 
/home/pi/develop/GDC/objdir/./gcc/xgcc 
-B/home/pi/develop/GDC/objdir/./gcc/ -B/opt/gdc/arm-linux-gnueabihf/bin/ 
-B/opt/gdc/arm-linux-gnueabihf/lib/ -isystem 
/opt/gdc/arm-linux-gnueabihf/include -isystem 
/opt/gdc/arm-linux-gnueabihf/sys-include
checking for suffix of object files... configure: error: in 
`/home/pi/develop/GDC/objdir/arm-linux-gnueabihf/libgcc':
configure: error: cannot compute suffix of object files: cannot compile
See `config.log' for more details.
make[1]: *** [configure-target-libgcc] Error 1
make[1]: Leaving directory `/home/pi/develop/GDC/objdir'
make: *** [all] Error 2
August 22, 2012
Re: Wiki updates
Am Wed, 22 Aug 2012 21:50:58 +0200
schrieb Sönke Ludwig <sludwig@outerproduct.org>:

> Am 21.08.2012 21:01, schrieb Johannes Pfau:
> > I restructured the http://gdcproject.org/wiki/Installation page, I
> > hope it's OK this way.
> >
> > I also added a Raspberry Pi overview page
> > http://gdcproject.org/wiki/Raspberry Pi and a new installation guide
> > for raspbian
> > http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
> > would be great if someone could test the raspbian guide and report
> > any success or failures. It works for me, but I'm not sure if I
> > forgot to document some details.
> 
> Thanks a lot for this - it would have taken ages for me to trace that 
> stuff down.
> 
> Not sure if this is necessary, but I also installed 'patchutils'
> because "rules clean" complained about 'lsdiff' missing.
> 
> However, I'm now still getting the error below.
> 
> PS: the wiki page seems to have been deleted during the spam clean
> up. If you need the contents of the raspian_hardfloat page, the page
> is still open in my browser so I can still copy them out.
> 

I moved the page, seems the wiki doesn't add a redirect automatically.
The new url is
http://gdcproject.org/wiki/Raspberry%20Pi/build/Raspbian%28Hardfloat%29
but it's also linked from the Install page.

> ---
> 
> (...)

Could you
post /home/pi/develop/GDC/objdir/arm-linux-gnueabihf/libgcc/config.log
please?
August 22, 2012
Re: Wiki updates
>> PS: the wiki page seems to have been deleted during the spam clean
>> up. If you need the contents of the raspian_hardfloat page, the page
>> is still open in my browser so I can still copy them out.
>>
>
> I moved the page, seems the wiki doesn't add a redirect automatically.
> The new url is
> http://gdcproject.org/wiki/Raspberry%20Pi/build/Raspbian%28Hardfloat%29
> but it's also linked from the Install page.
>

Ok, I see. I was quickly searching for a way on the wiki to the page but 
did just look in the developer section.

>
> Could you
> post /home/pi/develop/GDC/objdir/arm-linux-gnueabihf/libgcc/config.log
> please?
>
>

Attached.
August 22, 2012
Re: Wiki updates
On Wednesday, 22 August 2012 at 14:17:16 UTC, Iain Buclaw wrote:
> On Wednesday, 22 August 2012 at 13:51:12 UTC, Iain Buclaw wrote:
>> On Tuesday, 21 August 2012 at 19:01:17 UTC, Johannes Pfau 
>> wrote:
>>> I restructured the http://gdcproject.org/wiki/Installation 
>>> page, I hope
>>> it's OK this way.
>>>
>>> I also added a Raspberry Pi overview page
>>> http://gdcproject.org/wiki/Raspberry Pi and a new 
>>> installation guide
>>> for raspbian
>>> http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
>>> would be great if someone could test the raspbian guide and 
>>> report any
>>> success or failures. It works for me, but I'm not sure if I 
>>> forgot to
>>> document some details.
>>>
>>> @Iain the home page (http://gdcproject.org/wiki/Home) could 
>>> need some
>>> small updates:
>>>
>>> Frontend version still says 2.059 and links to the 2.057 
>>> changelog.
>>>
>>> There are still some references to the old issue tracker:
>>> "A bug, proposal, or enhancement can go to the issue tracker 
>>> on
>>> bitbucket."
>>> "This list is still maintained, however, new bugs should be 
>>> submitted
>>> to the Bitbucket repository."
>>>
>>> And this should probably be changed to refer to git commits:
>>> "Include the hg changeset or commit you are using for GDC. 
>>> (e.g. commit
>>> 114 or changset 6f03952ff48f)"
>>>
>>> If you give me permission to edit the home page (user 
>>> JohannesPfau) I
>>> can fix those, if not that's fine as well ;-)
>>>
>>> BTW:
>>> Would it be possible to add links to the gdcproject.org main 
>>> page,
>>> github repository, bug tracker and D.gnu forum to the wiki 
>>> Quick links
>>> list?
>>
>>
>> Fixed them - mostly.  I see a bit of spam has creeped in (oh 
>> noes!).  This might take me an hour to clean out as I can't 
>> seem to remove pages in bulk.
>>
>> In the meantime, I have added some silly textcha's - so sorry 
>> for the inconvenience!
>>
>> I could certainly add you to an admin group if only I knew 
>> how. :-)
>>
>> Regards
>> Iain
>
>
> OK, worked out how to remove them in bulk.  If anyone was 
> zealous enough to create a page in their own name, I'm sorry 
> but you've have your account removed. :P

Back online and finished last tweaks.  By the way, how's the 
styling doing for you?  I'm not really much of an eye for 
design...

Regards
Iain
August 23, 2012
Re: Wiki updates
Am Wed, 22 Aug 2012 23:56:35 +0200
schrieb Sönke Ludwig <sludwig@outerproduct.org>:

> conftest.c:1:0: sorry, unimplemented: -mfloat-abi=hard and VFP

I've had this issue before. The armhf-triplet.diff patch (shipped with
debian sources) wasn't applied for some reason. So something went wrong
when running "debian/rules patch". In my case I had to install the
"lsb-release" package. It's included in the "Installing packages"
command on the wiki page though, but maybe you've overlooked it?

Anyway, you should run "debian/rules clean" and then "debian/rules
patch" again and see if there's some suspicious output.
August 23, 2012
Re: Wiki updates
Am Thu, 23 Aug 2012 00:12:17 +0200
schrieb "Iain Buclaw" <ibuclaw@ubuntu.com>:
> 
> Back online and finished last tweaks. 

Great, thanks!
> By the way, how's the 
> styling doing for you?  I'm not really much of an eye for 
> design...

I think it's quite good. I don't really like the red text color in the
'code boxes', but everything else looks great.
August 23, 2012
Re: Wiki updates
Am 23.08.2012 10:04, schrieb Johannes Pfau:
> Am Wed, 22 Aug 2012 23:56:35 +0200
> schrieb Sönke Ludwig <sludwig@outerproduct.org>:
>
>> conftest.c:1:0: sorry, unimplemented: -mfloat-abi=hard and VFP
>
> I've had this issue before. The armhf-triplet.diff patch (shipped with
> debian sources) wasn't applied for some reason. So something went wrong
> when running "debian/rules patch". In my case I had to install the
> "lsb-release" package. It's included in the "Installing packages"
> command on the wiki page though, but maybe you've overlooked it?
>
> Anyway, you should run "debian/rules clean" and then "debian/rules
> patch" again and see if there's some suspicious output.
>

OK it was the package 'quilt' that was missing. Also the regex did not 
work for me, I changed it to just '^4\.7$' and then the setup went ok. 
I'm now compiling again.
« First   ‹ Prev
1 2
Top | Discussion index | About this forum | D home