Hi,

Any idea how to solve this error?

...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
 Error 1: Previous Definition Different : __Exit
OPTLINK : Warning 134: No Start Address

Regards,
Gilles

It means __Exit is multiply defined. Does it exist in your program?

"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:branke$2s73$1@digitaldaemon.com...
> Hi,
>
> Any idea how to solve this error?
>
> ...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
>   Error 1: Previous Definition Different : __Exit
> OPTLINK : Warning 134: No Start Address
>
> Regards,
> Gilles

Hi,

Exit does not exist in my sources. I didn't think so but I checked by searching all source and header files for definition of exit. None found.

I am trying to link a DLL if that has any importance.

Regards,
Gilles

Walter wrote:
> It means __Exit is multiply defined. Does it exist in your program?
> 
> "Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
> news:branke$2s73$1@digitaldaemon.com...
> 
>>Hi,
>>
>>Any idea how to solve this error?
>>
>>...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
>>  Error 1: Previous Definition Different : __Exit
>>OPTLINK : Warning 134: No Start Address

What library are you linking to?

"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:brd8m2$fqp$1@digitaldaemon.com...
> Hi,
>
> Exit does not exist in my sources. I didn't think so but I checked by searching all source and header files for definition of exit. None found.
>
> I am trying to link a DLL if that has any importance.
>
> Regards,
> Gilles
>
> Walter wrote:
> > It means __Exit is multiply defined. Does it exist in your program?
> >
> > "Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:branke$2s73$1@digitaldaemon.com...
> >
> >>Hi,
> >>
> >>Any idea how to solve this error?
> >>
> >>...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
> >>  Error 1: Previous Definition Different : __Exit
> >>OPTLINK : Warning 134: No Start Address

I am linking against kernel32 as well as an import library for an executable. I wonder whether I am correctly compiling and linking to create my dll.

Are the following command lines correct to build a dll from multiple object files?

dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file1.cpp
dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file2.cpp
dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file3.cpp

link file1.obj file2.obj file3.obj ,mydll.dll ,,kernel32 myimport

Regards,
Gilles

Walter wrote:
> What library are you linking to?
> 
> "Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
> news:brd8m2$fqp$1@digitaldaemon.com...
> 
>>Hi,
>>
>>Exit does not exist in my sources. I didn't think so but I checked by
>>searching all source and header files for definition of exit. None found.
>>
>>I am trying to link a DLL if that has any importance.
>>
>>Regards,
>>Gilles
>>
>>Walter wrote:
>>
>>>It means __Exit is multiply defined. Does it exist in your program?
>>>
>>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
>>>news:branke$2s73$1@digitaldaemon.com...
>>>
>>>
>>>>Hi,
>>>>
>>>>Any idea how to solve this error?
>>>>
>>>>...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
>>>> Error 1: Previous Definition Different : __Exit
>>>>OPTLINK : Warning 134: No Start Address

Run grep across the libraries you are linking with and see who is defining __Exit.

"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:brg2rp$2lnj$1@digitaldaemon.com...
> I am linking against kernel32 as well as an import library for an executable. I wonder whether I am correctly compiling and linking to create my dll.
>
> Are the following command lines correct to build a dll from multiple object files?
>
> dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file1.cpp
> dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file2.cpp
> dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file3.cpp
>
> link file1.obj file2.obj file3.obj ,mydll.dll ,,kernel32 myimport
>
> Regards,
> Gilles
>
> Walter wrote:
> > What library are you linking to?
> >
> > "Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:brd8m2$fqp$1@digitaldaemon.com...
> >
> >>Hi,
> >>
> >>Exit does not exist in my sources. I didn't think so but I checked by searching all source and header files for definition of exit. None
found.
> >>
> >>I am trying to link a DLL if that has any importance.
> >>
> >>Regards,
> >>Gilles
> >>
> >>Walter wrote:
> >>
> >>>It means __Exit is multiply defined. Does it exist in your program?
> >>>
> >>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:branke$2s73$1@digitaldaemon.com...
> >>>
> >>>
> >>>>Hi,
> >>>>
> >>>>Any idea how to solve this error?
> >>>>
> >>>>...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
> >>>> Error 1: Previous Definition Different : __Exit
> >>>>OPTLINK : Warning 134: No Start Address

Hi,

The only references I have found after running 'grep -i __Exit' are in dm libraries snd.lib, sdc.lib, sdl.lib, sdm.lib, sds.lib, sdx.lib and snn.lib. I searched my object files, my specific import library and the import libraries in the dm lib directory.

Running 'grep __exit' and 'grep __Exit' shows that only snn.lib contains both.

I replaced snn.lib from 8.39.1 with the one from 8.38 and no longer have the problem.

Regards,
Gilles

Walter wrote:
> Run grep across the libraries you are linking with and see who is defining
> __Exit.
> 
> "Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
> news:brg2rp$2lnj$1@digitaldaemon.com...
> 
>>I am linking against kernel32 as well as an import library for an
>>executable. I wonder whether I am correctly compiling and linking to
>>create my dll.
>>
>>Are the following command lines correct to build a dll from multiple
>>object files?
>>
>>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file1.cpp
>>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file2.cpp
>>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file3.cpp
>>
>>link file1.obj file2.obj file3.obj ,mydll.dll ,,kernel32 myimport
>>
>>Regards,
>>Gilles
>>
>>Walter wrote:
>>
>>>What library are you linking to?
>>>
>>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
>>>news:brd8m2$fqp$1@digitaldaemon.com...
>>>
>>>
>>>>Hi,
>>>>
>>>>Exit does not exist in my sources. I didn't think so but I checked by
>>>>searching all source and header files for definition of exit. None
> 
> found.
> 
>>>>I am trying to link a DLL if that has any importance.
>>>>
>>>>Regards,
>>>>Gilles
>>>>
>>>>Walter wrote:
>>>>
>>>>
>>>>>It means __Exit is multiply defined. Does it exist in your program?
>>>>>
>>>>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
>>>>>news:branke$2s73$1@digitaldaemon.com...
>>>>>
>>>>>
>>>>>
>>>>>>Hi,
>>>>>>
>>>>>>Any idea how to solve this error?
>>>>>>
>>>>>>...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
>>>>>>Error 1: Previous Definition Different : __Exit

Try the linker switch /noignorecase.

"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:brhqsb$2475$1@digitaldaemon.com...
> Hi,
>
> The only references I have found after running 'grep -i __Exit' are in dm libraries snd.lib, sdc.lib, sdl.lib, sdm.lib, sds.lib, sdx.lib and snn.lib. I searched my object files, my specific import library and the import libraries in the dm lib directory.
>
> Running 'grep __exit' and 'grep __Exit' shows that only snn.lib contains both.
>
> I replaced snn.lib from 8.39.1 with the one from 8.38 and no longer have the problem.
>
> Regards,
> Gilles
>
> Walter wrote:
> > Run grep across the libraries you are linking with and see who is
defining
> > __Exit.
> >
> > "Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:brg2rp$2lnj$1@digitaldaemon.com...
> >
> >>I am linking against kernel32 as well as an import library for an executable. I wonder whether I am correctly compiling and linking to create my dll.
> >>
> >>Are the following command lines correct to build a dll from multiple object files?
> >>
> >>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file1.cpp
> >>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file2.cpp
> >>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file3.cpp
> >>
> >>link file1.obj file2.obj file3.obj ,mydll.dll ,,kernel32 myimport
> >>
> >>Regards,
> >>Gilles
> >>
> >>Walter wrote:
> >>
> >>>What library are you linking to?
> >>>
> >>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:brd8m2$fqp$1@digitaldaemon.com...
> >>>
> >>>
> >>>>Hi,
> >>>>
> >>>>Exit does not exist in my sources. I didn't think so but I checked by searching all source and header files for definition of exit. None
> >
> > found.
> >
> >>>>I am trying to link a DLL if that has any importance.
> >>>>
> >>>>Regards,
> >>>>Gilles
> >>>>
> >>>>Walter wrote:
> >>>>
> >>>>
> >>>>>It means __Exit is multiply defined. Does it exist in your program?
> >>>>>
> >>>>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message news:branke$2s73$1@digitaldaemon.com...
> >>>>>
> >>>>>
> >>>>>
> >>>>>>Hi,
> >>>>>>
> >>>>>>Any idea how to solve this error?
> >>>>>>
> >>>>>>...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3 Error 1: Previous Definition Different : __Exit
>

Hi Walter,

The /noignorecase linker option solves the problem after putting back snn.lib from 8.39.1 beta. I guess that option needs to be the default now :-)

Thanks,
Gilles

Walter wrote:
> Try the linker switch /noignorecase.
> 
> "Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
> news:brhqsb$2475$1@digitaldaemon.com...
> 
>>Hi,
>>
>>The only references I have found after running 'grep -i __Exit' are in
>>dm libraries snd.lib, sdc.lib, sdl.lib, sdm.lib, sds.lib, sdx.lib and
>>snn.lib. I searched my object files, my specific import library and the
>>import libraries in the dm lib directory.
>>
>>Running 'grep __exit' and 'grep __Exit' shows that only snn.lib contains
>>both.
>>
>>I replaced snn.lib from 8.39.1 with the one from 8.38 and no longer have
>>the problem.
>>
>>Regards,
>>Gilles
>>
>>Walter wrote:
>>
>>>Run grep across the libraries you are linking with and see who is
> 
> defining
> 
>>>__Exit.
>>>
>>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
>>>news:brg2rp$2lnj$1@digitaldaemon.com...
>>>
>>>
>>>>I am linking against kernel32 as well as an import library for an
>>>>executable. I wonder whether I am correctly compiling and linking to
>>>>create my dll.
>>>>
>>>>Are the following command lines correct to build a dll from multiple
>>>>object files?
>>>>
>>>>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file1.cpp
>>>>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file2.cpp
>>>>dmc -c -mn -WD -D_POSIX_ -Id:\myincludedir file3.cpp
>>>>
>>>>link file1.obj file2.obj file3.obj ,mydll.dll ,,kernel32 myimport
>>>>
>>>>Regards,
>>>>Gilles
>>>>
>>>>Walter wrote:
>>>>
>>>>
>>>>>What library are you linking to?
>>>>>
>>>>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
>>>>>news:brd8m2$fqp$1@digitaldaemon.com...
>>>>>
>>>>>
>>>>>
>>>>>>Hi,
>>>>>>
>>>>>>Exit does not exist in my sources. I didn't think so but I checked by
>>>>>>searching all source and header files for definition of exit. None
>>>
>>>found.
>>>
>>>
>>>>>>I am trying to link a DLL if that has any importance.
>>>>>>
>>>>>>Regards,
>>>>>>Gilles
>>>>>>
>>>>>>Walter wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>It means __Exit is multiply defined. Does it exist in your program?
>>>>>>>
>>>>>>>"Gilles Depeyrot" <gilles_depeyrot@mac.com> wrote in message
>>>>>>>news:branke$2s73$1@digitaldaemon.com...
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>Hi,
>>>>>>>>
>>>>>>>>Any idea how to solve this error?
>>>>>>>>
>>>>>>>>...\dm\bin\..\lib\SNN.lib(_exit)  Offset 061D5H Record Type 00C3
>>>>>>>>Error 1: Previous Definition Different : __Exit
>>
> 
>