http://d.puremagic.com/issues/show_bug.cgi?id=429

           Summary: Unable to distinguish between empty and uninitialized
                    dynamic arrays
           Product: D
           Version: unspecified
          Platform: All
        OS/Version: All
            Status: NEW
          Severity: minor
          Priority: P4
         Component: Phobos
        AssignedTo: bugzilla@digitalmars.com
        ReportedBy: ddparnell@bigpond.com


When setting the length of a dynamic array to zero, phobos (gc) also frees the RAM for that array. This means that applications cannot tell an uninitialized array from an empty array. It also means that an application cannot reserve RAM in the generic case.

Note that reducing the length of an array to a value greater than zero does not cause this behaviour, instead all the RAM for the array is reusable when the application later increases the length.

Example:
   int[] test;
   test.length = 10;
   // Show address of array start and its length (10)
   writefln("%s %s", cast(uint)test.ptr, test.length);

   test.length = 1;
   // Show address of array start and its length (1)
   writefln("%s %s", cast(uint)test.ptr, test.length);

   test.length = 8;
   // Show address of array start and its length (8)
   writefln("%s %s", cast(uint)test.ptr, test.length);

   test.length = 0;
   // Shows 0 and 0!
   writefln("%s %s", cast(uint)test.ptr, test.length);

If an application needs to reset an array to the uninitialized state then it can do 'arrayname = null;'.

The change to gc.d could be done as a two-line change ...

extern (C)
byte[] _d_arraysetlength2(size_t newlength, size_t sizeelem, Array *p, ...)
in
{
    assert(sizeelem);
    assert(!p.length || p.data);
}
body
{
    byte* newdata;

    debug(PRINTF)
    {
        printf("_d_arraysetlength2(p = %p, sizeelem = %d, newlength = %d)\n",
p, sizeelem, newlength);
        if (p)
            printf("\tp.data = %p, p.length = %d\n", p.data, p.length);
    }

    if (newlength)
    {
        version (D_InlineAsm_X86)
        {
            size_t newsize = void;

            asm
            {
                mov     EAX,newlength   ;
                mul     EAX,sizeelem    ;
                mov     newsize,EAX     ;
                jc      Loverflow       ;
            }
        }
        else
        {
            size_t newsize = sizeelem * newlength;

            if (newsize / newlength != sizeelem)
                goto Loverflow;
        }
        //printf("newsize = %x, newlength = %x\n", newsize, newlength);

        size_t size = p.length * sizeelem;
        if (p.data)  // <<-CHG
        {
            newdata = p.data;
            if (newlength > p.length)
            {
                size_t cap = _gc.capacity(p.data);

                if (cap <= newsize)
                {
                    newdata = cast(byte *)_gc.malloc(newsize + 1);
                    newdata[0 .. size] = p.data[0 .. size];
                }
            }
        }
        else
        {
            newdata = cast(byte *)_gc.malloc(newsize + 1);
        }

        va_list q;
        va_start!(Array *)(q, p);       // q is pointer to initializer

        if (newsize > size)
        {
            if (sizeelem == 1)
            {
                //printf("newdata = %p, size = %d, newsize = %d, *q = %d\n",
newdata, size, newsize, *cast(byte*)q);
                newdata[size .. newsize] = *(cast(byte*)q);
            }
            else
            {
                for (size_t u = size; u < newsize; u += sizeelem)
                {
                    memcpy(newdata + u, q, sizeelem);
                }
            }
        }
    }
    else
    {
      newdata = p.data;  //<<-CHG
    }

    p.data = newdata;
    p.length = newlength;
    return newdata[0 .. newlength];

Loverflow:
    _d_OutOfMemory();
}


-- 

<d-bugmail@puremagic.com> wrote in message news:bug-429-3@http.d.puremagic.com/issues/...
> http://d.puremagic.com/issues/show_bug.cgi?id=429
>
>           Summary: Unable to distinguish between empty and uninitialized
>                    dynamic arrays
>           Product: D
>           Version: unspecified
>          Platform: All
>        OS/Version: All
>            Status: NEW
>          Severity: minor
>          Priority: P4
>         Component: Phobos
>        AssignedTo: bugzilla@digitalmars.com
>        ReportedBy: ddparnell@bigpond.com
>
>
> When setting the length of a dynamic array to zero, phobos (gc) also frees
> the
> RAM for that array. This means that applications cannot tell an
> uninitialized
> array from an empty array. It also means that an application cannot
> reserve RAM
> in the generic case.
>
> Note that reducing the length of an array to a value greater than zero
> does not
> cause this behaviour, instead all the RAM for the array is reusable when
> the
> application later increases the length.
>
> Example:
>   int[] test;
>   test.length = 10;
>   // Show address of array start and its length (10)
>   writefln("%s %s", cast(uint)test.ptr, test.length);
>
>   test.length = 1;
>   // Show address of array start and its length (1)
>   writefln("%s %s", cast(uint)test.ptr, test.length);
>
>   test.length = 8;
>   // Show address of array start and its length (8)
>   writefln("%s %s", cast(uint)test.ptr, test.length);
>
>   test.length = 0;
>   // Shows 0 and 0!
>   writefln("%s %s", cast(uint)test.ptr, test.length);
>
> If an application needs to reset an array to the uninitialized state then
> it
> can do 'arrayname = null;'.
>
> The change to gc.d could be done as a two-line change ...
>
> extern (C)
> byte[] _d_arraysetlength2(size_t newlength, size_t sizeelem, Array *p,
> ...)
> in
> {
>    assert(sizeelem);
>    assert(!p.length || p.data);
> }
> body
> {
>    byte* newdata;
>
>    debug(PRINTF)
>    {
>        printf("_d_arraysetlength2(p = %p, sizeelem = %d, newlength =
> %d)\n",
> p, sizeelem, newlength);
>        if (p)
>            printf("\tp.data = %p, p.length = %d\n", p.data, p.length);
>    }
>
>    if (newlength)
>    {
>        version (D_InlineAsm_X86)
>        {
>            size_t newsize = void;
>
>            asm
>            {
>                mov     EAX,newlength   ;
>                mul     EAX,sizeelem    ;
>                mov     newsize,EAX     ;
>                jc      Loverflow       ;
>            }
>        }
>        else
>        {
>            size_t newsize = sizeelem * newlength;
>
>            if (newsize / newlength != sizeelem)
>                goto Loverflow;
>        }
>        //printf("newsize = %x, newlength = %x\n", newsize, newlength);
>
>        size_t size = p.length * sizeelem;
>        if (p.data)  // <<-CHG
>        {
>            newdata = p.data;
>            if (newlength > p.length)
>            {
>                size_t cap = _gc.capacity(p.data);
>
>                if (cap <= newsize)
>                {
>                    newdata = cast(byte *)_gc.malloc(newsize + 1);
>                    newdata[0 .. size] = p.data[0 .. size];
>                }
>            }
>        }
>        else
>        {
>            newdata = cast(byte *)_gc.malloc(newsize + 1);
>        }
>
>        va_list q;
>        va_start!(Array *)(q, p);       // q is pointer to initializer
>
>        if (newsize > size)
>        {
>            if (sizeelem == 1)
>            {
>                //printf("newdata = %p, size = %d, newsize = %d, *q =
> %d\n",
> newdata, size, newsize, *cast(byte*)q);
>                newdata[size .. newsize] = *(cast(byte*)q);
>            }
>            else
>            {
>                for (size_t u = size; u < newsize; u += sizeelem)
>                {
>                    memcpy(newdata + u, q, sizeelem);
>                }
>            }
>        }
>    }
>    else
>    {
>      newdata = p.data;  //<<-CHG
>    }
>
>    p.data = newdata;
>    p.length = newlength;
>    return newdata[0 .. newlength];
>
> Loverflow:
>    _d_OutOfMemory();
> }
>
>
> -- 
>
Perhaps a better solution to this would be some sort of capacity variable; setting length to 0 does nothing, but setting capacity to 0 frees memmory. Capacity would contain the maximum amount an array could hold without a new allocation, and if length is set greater than capacity a new allocation occurs and capacity is adjusted accordingly.  This way the size of the memmory block and the actual array are two different things if you wanted to use them that way , but at the same time you can treat them as the same thing.

http://d.puremagic.com/issues/show_bug.cgi?id=429


bugzilla@digitalmars.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|                            |FIXED




------- Comment #2 from bugzilla@digitalmars.com  2006-10-18 13:30 -------
Fixed DMD 0.170


-- 

http://d.puremagic.com/issues/show_bug.cgi?id=429


mk@krej.cz changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|RESOLVED                    |REOPENED
         Resolution|FIXED                       |




------- Comment #3 from mk@krej.cz  2006-11-08 15:36 -------
Linux DMD 0.173 seems to still have the original issue, Windows version works ok.


-- 

http://d.puremagic.com/issues/show_bug.cgi?id=429


bugzilla@digitalmars.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|REOPENED                    |RESOLVED
         Resolution|                            |FIXED




------- Comment #4 from bugzilla@digitalmars.com  2006-11-25 03:52 -------
Fixed DMD 0.175


--