Thread overview |
---|
August 31, 2017 GitBook about D on embedded ARM Linux | ||||
---|---|---|---|---|
| ||||
There is no single point of entry to find information about how to use D on ARM Linux. I created a small project on GitHub https://github.com/fkromer/d-on-embedded-linux-arm which shall enable absolute beginners (of embedded Linux and D) to get started as fast as possible. The project is in sync with a GitBook page https://fkromer.gitbooks.io/d-on-embedded-linux-arm/content/. The BeagleBone Black https://beagleboard.org/black is used as exemplary development board (a lot of information and tutorials available e.g. here http://exploringbeaglebone.com/, board hardware is extensible easily and in a modular manner with "capes" https://beagleboard.org/cape http://elinux.org/Beagleboard:BeagleBone_Capes). |
September 01, 2017 Re: GitBook about D on embedded ARM Linux | ||||
---|---|---|---|---|
| ||||
Posted in reply to thinwybk | On Thursday, 31 August 2017 at 14:43:22 UTC, thinwybk wrote:
> There is no single point of entry to find information about how to use D on ARM Linux. I created a small project on GitHub https://github.com/fkromer/d-on-embedded-linux-arm which shall enable absolute beginners (of embedded Linux and D) to get started as fast as possible. The project is in sync with a GitBook page https://fkromer.gitbooks.io/d-on-embedded-linux-arm/content/. The BeagleBone Black https://beagleboard.org/black is used as exemplary development board (a lot of information and tutorials available e.g. here http://exploringbeaglebone.com/, board hardware is extensible easily and in a modular manner with "capes" https://beagleboard.org/cape http://elinux.org/Beagleboard:BeagleBone_Capes).
I'm interested in it as I'm planning to making my graphics engine usable on as many platforms as possible.
|
September 01, 2017 Re: GitBook about D on embedded ARM Linux | ||||
---|---|---|---|---|
| ||||
Posted in reply to thinwybk | On Thursday, 31 August 2017 at 14:43:22 UTC, thinwybk wrote:
> There is no single point of entry to find information about how to use D on ARM Linux. I created a small project on GitHub https://github.com/fkromer/d-on-embedded-linux-arm which shall enable absolute beginners (of embedded Linux and D) to get started as fast as possible. The project is in sync with a GitBook page https://fkromer.gitbooks.io/d-on-embedded-linux-arm/content/. The BeagleBone Black https://beagleboard.org/black is used as exemplary development board (a lot of information and tutorials available e.g. here http://exploringbeaglebone.com/, board hardware is extensible easily and in a modular manner with "capes" https://beagleboard.org/cape http://elinux.org/Beagleboard:BeagleBone_Capes).
That's interesting. Might do some DIY robotics in future.
|
September 03, 2017 Re: GitBook about D on embedded ARM Linux | ||||
---|---|---|---|---|
| ||||
Posted in reply to aberba | > That's interesting. Might do some DIY robotics in future. I would like to create a hardware abstraction layer for the BeagleBone Black (the board I am playing around with in my spare time which is very beginner friendly and flexible w.r.t. to hardware interfaces due to a lot of "capes" https://beagleboard.org/cape which are available for it) comparable with this HAL for embedded boards in Go https://github.com/kidoman/embd. This would allow people with little "low level" programming experience to play around with D on embedded linux as well. In the beginning porting some of the C++ classes from https://github.com/derekmolloy/exploringBB/tree/master/chp06 could be a good starting point. Or does someone know another HAL implementation which could be more suitable as "template" to start with? However as always... motivation is high, time is limited. Feel free to join :) |
September 05, 2017 Re: GitBook about D on embedded ARM Linux | ||||
---|---|---|---|---|
| ||||
Posted in reply to thinwybk | On Sunday, 3 September 2017 at 16:17:37 UTC, thinwybk wrote: > In the beginning porting some of the C++ classes from https://github.com/derekmolloy/exploringBB/tree/master/chp06 could be a good starting point. ...the complete C++ HAL can be found here: https://github.com/derekmolloy/exploringBB/tree/master/library |
September 10, 2017 Re: GitBook about D on embedded ARM Linux | ||||
---|---|---|---|---|
| ||||
Posted in reply to thinwybk | On Thursday, 31 August 2017 at 14:43:22 UTC, thinwybk wrote:
> The project is in sync with a GitBook page https://fkromer.gitbooks.io/d-on-embedded-linux-arm/content/.
d-on-embedded-linux-arm.de
|
November 22, 2017 Re: GitBook about D on embedded ARM Linux | ||||
---|---|---|---|---|
| ||||
Posted in reply to aberba | On Friday, 1 September 2017 at 09:14:30 UTC, aberba wrote: > On Thursday, 31 August 2017 at 14:43:22 UTC, thinwybk wrote: >> There is no single point of entry to find information about how to use D on ARM Linux. I created a small project on GitHub https://github.com/fkromer/d-on-embedded-linux-arm which shall enable absolute beginners (of embedded Linux and D) to get started as fast as possible. The project is in sync with a GitBook page https://fkromer.gitbooks.io/d-on-embedded-linux-arm/content/. The BeagleBone Black https://beagleboard.org/black is used as exemplary development board (a lot of information and tutorials available e.g. here http://exploringbeaglebone.com/, board hardware is extensible easily and in a modular manner with "capes" https://beagleboard.org/cape http://elinux.org/Beagleboard:BeagleBone_Capes). > > That's interesting. Might do some DIY robotics in future. For everyone interested in robotics: http://forum.dlang.org/post/kaueagtpddunohmuffuv@forum.dlang.org (request for help developing a client library in D for the Robot Operating System) |
Copyright © 1999-2021 by the D Language Foundation