Thread overview | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
|
February 20, 2001 STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
The current version of STL SGI will not compile with DM 8.0 (and presumably 8.02) because of a class with the __out. I previously reported to the egroup as follows:
> I can now confirm the following for STL SGI 3.20
>
> 1. All the occurences of __out are in stl_algo.h
> 2. Replacing them by something else (I used __outI ) removes the
> comipilation problem with DM 8.00
This works because the occurences of __out in STL SGI 3.20 are all internal to various functions.
John
|
February 20, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to John Fletcher | Thanks for tracking that down & solving it! -Walter John Fletcher wrote in message <3A9247B0.56D19532@aston.ac.uk>... >The current version of STL SGI will not compile with DM 8.0 (and presumably 8.02) because of a class with the __out. I previously reported to the egroup as follows: > >> I can now confirm the following for STL SGI 3.20 >> >> 1. All the occurences of __out are in stl_algo.h >> 2. Replacing them by something else (I used __outI ) removes the >> comipilation problem with DM 8.00 > >This works because the occurences of __out in STL SGI 3.20 are all internal to various functions. > >John > > |
February 20, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to John Fletcher | John,
Have you been able to access the CVS repository at all?
I would appreciate if you could commit your changes to the STL/SGI
tree so I am sure I am running with that stuff too!
Thanks!
Jan
John Fletcher wrote:
> The current version of STL SGI will not compile with DM 8.0 (and presumably 8.02) because of a class with the __out. I previously reported to the egroup as follows:
>
> > I can now confirm the following for STL SGI 3.20
> >
> > 1. All the occurences of __out are in stl_algo.h
> > 2. Replacing them by something else (I used __outI ) removes the
> > comipilation problem with DM 8.00
>
> This works because the occurences of __out in STL SGI 3.20 are all internal to various functions.
>
> John
|
February 21, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to John Fletcher | I've had a similias experience with STLPort 4.0... "John Fletcher" <J.P.Fletcher@aston.ac.uk> wrote in message news:3A9247B0.56D19532@aston.ac.uk... > The current version of STL SGI will not compile with DM 8.0 (and presumably 8.02) because of a class with the __out. I previously reported to the egroup as follows: > > > I can now confirm the following for STL SGI 3.20 > > > > 1. All the occurences of __out are in stl_algo.h > > 2. Replacing them by something else (I used __outI ) removes the > > comipilation problem with DM 8.00 > > This works because the occurences of __out in STL SGI 3.20 are all internal to various functions. > > John Files: _algo.c _algo.h _monetary.c _numeric_facets.c _sstream.c ...all reference _out. I changed all occurances of _out to _outt and it works. Each of these occurances of _out were either local variables or parameter names and had no scope outside the functions they were used in. Mark Solinski SAP Labs |
February 23, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to Jan Knepper | I had checked the changes into CVS a while back for version 8 of the compiler.
On Tue, 20 Feb 2001 11:51:59 -0500, Jan Knepper <jan@smartsoft.cc> wrote:
> John,
>
> Have you been able to access the CVS repository at all?
> I would appreciate if you could commit your changes to the STL/SGI
> tree so I am sure I am running with that stuff too!
>
> Thanks!
> Jan
>
>
>
> John Fletcher wrote:
>
> > The current version of STL SGI will not compile with DM 8.0 (and presumably 8.02) because of a class with the __out. I previously reported to the egroup as follows:
> >
> > > I can now confirm the following for STL SGI 3.20
> > >
> > > 1. All the occurences of __out are in stl_algo.h
> > > 2. Replacing them by something else (I used __outI ) removes the
> > > comipilation problem with DM 8.00
> >
> > This works because the occurences of __out in STL SGI 3.20 are all internal to various functions.
> >
> > John
>
|
February 23, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to Damian Dixon | I know, but that was STL port and not SGI STL right?
Jan
Damian Dixon wrote:
> I had checked the changes into CVS a while back for version 8 of the compiler.
>
> On Tue, 20 Feb 2001 11:51:59 -0500, Jan Knepper <jan@smartsoft.cc> wrote:
> > John,
> >
> > Have you been able to access the CVS repository at all?
> > I would appreciate if you could commit your changes to the STL/SGI
> > tree so I am sure I am running with that stuff too!
> >
> > Thanks!
> > Jan
> >
> >
> >
> > John Fletcher wrote:
> >
> > > The current version of STL SGI will not compile with DM 8.0 (and presumably 8.02) because of a class with the __out. I previously reported to the egroup as follows:
> > >
> > > > I can now confirm the following for STL SGI 3.20
> > > >
> > > > 1. All the occurences of __out are in stl_algo.h
> > > > 2. Replacing them by something else (I used __outI ) removes the
> > > > comipilation problem with DM 8.00
> > >
> > > This works because the occurences of __out in STL SGI 3.20 are all internal to various functions.
> > >
> > > John
> >
> > --
|
February 27, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to Jan Knepper |
Jan Knepper wrote:
> I know, but that was STL port and not SGI STL right?
>
> Jan
>
O.K. I will dig out my patches.
John
|
March 01, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to Jan Knepper | Yes it was STL port rather then SGI STL, Sorry for the confusion. Damian. Jan Knepper <jan@smartsoft.cc> wrote in message news:3A9697F7.F05E8A2B@smartsoft.cc... > I know, but that was STL port and not SGI STL right? > > Jan > > > > Damian Dixon wrote: > > > I had checked the changes into CVS a while back for version 8 of the compiler. > > > > On Tue, 20 Feb 2001 11:51:59 -0500, Jan Knepper <jan@smartsoft.cc> wrote: > > > John, > > > > > > Have you been able to access the CVS repository at all? > > > I would appreciate if you could commit your changes to the STL/SGI > > > tree so I am sure I am running with that stuff too! > > > > > > Thanks! > > > Jan > > > > > > > > > > > > John Fletcher wrote: > > > > > > > The current version of STL SGI will not compile with DM 8.0 (and presumably 8.02) because of a class with the __out. I previously reported to the egroup as follows: > > > > > > > > > I can now confirm the following for STL SGI 3.20 > > > > > > > > > > 1. All the occurences of __out are in stl_algo.h > > > > > 2. Replacing them by something else (I used __outI ) removes the > > > > > comipilation problem with DM 8.00 > > > > > > > > This works because the occurences of __out in STL SGI 3.20 are all internal to various functions. > > > > > > > > John > > > |
March 02, 2001 Re: STL SGI and DM 8.02 | ||||
---|---|---|---|---|
| ||||
Posted in reply to Damian Dixon |
Damian Dixon wrote:
> Yes it was STL port rather then SGI STL, Sorry for the confusion.
>
> Damian.
>
O.K. I will post my changes.
John
|
Copyright © 1999-2021 by the D Language Foundation