Thread overview | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
April 01, 2009 Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Hi ,I am going to compiling DWT2 +tango 0998+rake.I have done below steps: 1.Download Tango0998+DMD1.041 2.Download dmc from: http://www.digitalmars.com/d/2.0/dmd-windows.html Up to now the D folder is as below: c:\ ----dmd\ ----dm 3.Download and install ruby to C:\ from http://www.ruby-lang.org/en/downloads/ The version I chose is Ruby 1.8.6-one-click-installer Now I have C:\ruby 4.Install rake: In folder C:\ruby\bin: >gem install --remote rake Now in C:\ruby\bin I have rake.bat and rake.cmd; 5.Install TortoiseHg0.72 to c:\program files\ from below link: http://bitbucket.org/tortoisehg/stable/wiki/Home 6.In c:\dmd\import there are two subfolders:C:\dmd\std and c:\dmd\tango. Create a new folder c:\dmd\import\dwt2; 7.Right from c:\dmd\import right click mouse tortoiseHG->Clone a Respository: Source Path:http://hg.dsource.org/projects/dwt2 Destination Path:c:\dmd\import\dwt2 Leave the other options default. OK.All above have been done without any error and HG proceeded completed and successfully. What should I do in next step?Please guide me.Thanks. Regards, Sam |
April 01, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sam Hu | 1.I also noticed that in C:\dm\lib there are 18 lib files where there are only 12 lib files in C:\dmd\lib. 2.Update:there is a typo regarding folder C:\dmd\import.All the D files in C drive is as below: c:\ ----dm\ ----dmd\ ----dmd\bin\ ----dmd\lib\ ----dmd\example\ ----dmd\import\ ----dmd\import\std\ ----dmd\import\tango\ ----dmd\import\dwt2--------Created by myself where dwt2 was downloaded to. |
April 01, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sam Hu | Sam Hu schrieb: > Hi ,I am going to compiling DWT2 +tango 0998+rake.I have done below steps: > 1.Download Tango0998+DMD1.041 > 2.Download dmc from: > http://www.digitalmars.com/d/2.0/dmd-windows.html > Up to now the D folder is as below: > c:\ > ----dmd\ > ----dm > 3.Download and install ruby to C:\ from http://www.ruby-lang.org/en/downloads/ > The version I chose is Ruby 1.8.6-one-click-installer > Now I have C:\ruby > 4.Install rake: > In folder C:\ruby\bin: >> gem install --remote rake > Now in C:\ruby\bin I have rake.bat and rake.cmd; > 5.Install TortoiseHg0.72 to c:\program files\ from below link: > http://bitbucket.org/tortoisehg/stable/wiki/Home > 6.In c:\dmd\import there are two subfolders:C:\dmd\std and c:\dmd\tango. Create a new folder c:\dmd\import\dwt2; > 7.Right from c:\dmd\import right click mouse tortoiseHG->Clone a Respository: > Source Path:http://hg.dsource.org/projects/dwt2 > Destination Path:c:\dmd\import\dwt2 > Leave the other options default. > > OK.All above have been done without any error and HG proceeded completed and successfully. > > What should I do in next step?Please guide me.Thanks. > > Regards, > Sam > Hi I have made changes to dwt2 to work it like the following receipt. Download the tango release and dwt2 to c:\Project\tango-0.99.8-bin-win32-dmd.1.041 c:\Project\dwt2 Then add dmd to the PATH C:\Project> set PATH=%PATH%;c:\Project\tango-0.99.8-bin-win32-dmd.1.041\bin Verify the dmd version C:\Project> dmd Digital Mars D Compiler v1.041 ... Then build the libs and snippets C:\Project\dwt2> rake clean base swt (in C:/Project/dwt2) Cleaning Building dwt-base Building org.eclipse.swt.win32.win32.x86 C:\Project\dwt2> rake swtsnippets Building swtsnippets[Snippet10] Building swtsnippets[Snippet107] Building swtsnippets[Snippet108] Building swtsnippets[Snippet109] Building swtsnippets[Snippet111] ... (Cancel with Ctrl+C) C:\Project\dwt2> bin\SwtSnippet10.exe To build your own application... Add the 'imp' dir to your import search path: -IC:\Project\dwt2\imp Add the 'lib' dir to your library search path: -L+C:\Project\dwt2\lib\ Add all needed libraries to the commandline: -L+advapi32.lib -L+comctl32.lib -L+comdlg32.lib -L+gdi32.lib -L+kernel32.lib -L+shell32.lib -L+ole32.lib -L+oleaut32.lib -L+olepro32.lib -L+oleacc.lib -L+user32.lib -L+usp10.lib -L+msimg32.lib -L+opengl32.lib -L+shlwapi.lib -L+zlib.lib -L+dwt-base.lib -L+org.eclipse.swt.win32.win32.x86.lib Frank |
April 01, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Frank Benoit | Add the 'imp' dir to your import search path:
> -IC:\Project\dwt2\imp
> Add the 'lib' dir to your library search path:
> -L+C:\Project\dwt2\lib\
> Add all needed libraries to the commandline:
> -L+advapi32.lib
> -L+comctl32.lib
> -L+comdlg32.lib
> -L+gdi32.lib
> -L+kernel32.lib
> -L+shell32.lib
> -L+ole32.lib
> -L+oleaut32.lib
> -L+olepro32.lib
> -L+oleacc.lib
> -L+user32.lib
> -L+usp10.lib
> -L+msimg32.lib
> -L+opengl32.lib
> -L+shlwapi.lib
> -L+zlib.lib
> -L+dwt-base.lib
> -L+org.eclipse.swt.win32.win32.x86.lib
>
Any shorthand that can save this so long -I and -L everytime?Thanks.
|
April 01, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sam Hu | Sam Hu schrieb: > Add the 'imp' dir to your import search path: >> -IC:\Project\dwt2\imp >> Add the 'lib' dir to your library search path: >> -L+C:\Project\dwt2\lib\ >> Add all needed libraries to the commandline: >> -L+advapi32.lib >> -L+comctl32.lib >> -L+comdlg32.lib >> -L+gdi32.lib >> -L+kernel32.lib >> -L+shell32.lib >> -L+ole32.lib >> -L+oleaut32.lib >> -L+olepro32.lib >> -L+oleacc.lib >> -L+user32.lib >> -L+usp10.lib >> -L+msimg32.lib >> -L+opengl32.lib >> -L+shlwapi.lib >> -L+zlib.lib >> -L+dwt-base.lib >> -L+org.eclipse.swt.win32.win32.x86.lib >> > Any shorthand that can save this so long -I and -L everytime?Thanks. Yeah, it should be possible. I tried the pragma(lib, ..) but unfortunately it seems to me, there is a dmd bug. http://d.puremagic.com/issues/show_bug.cgi?id=2776 Frank |
April 02, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Frank Benoit | Hi Frank, Doe it work if we add these -I and -L into the sc.ini file? Sam |
April 02, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sam Hu | Hi Frank, I compiled DWT2 successfuly base on your path/folders.But I have a couple of questions: 1.How do I compile my own d program which is not in the swtsnippets folder,say in anohter drive,D:\dprogram\ex?How is the command look like--rake ??? 2.Is jface and other packages such as draw2d,core.job,core.runtime,jface.text,osgi,ui.forms,text,and tools compilable and workable at this moment,if yes,how to compile? 3.Is dssss still workable to compile DWT2 program? Thanks and best regards, Sam |
April 02, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sam Hu | Sam Hu schrieb: > Hi Frank, > > I compiled DWT2 successfuly base on your path/folders.But I have a couple of questions: > 1.How do I compile my own d program which is not in the swtsnippets folder,say in anohter drive,D:\dprogram\ex?How is the command look like--rake ??? If you compile your own app, you can use whatever build system you want. > 2.Is jface and other packages such as draw2d,core.job,core.runtime,jface.text,osgi,ui.forms,text,and tools compilable and workable at this moment,if yes,how to compile? Yes, you can show the other rake build targets with > rake -T > 3.Is dssss still workable to compile DWT2 program? Yes, you can just put all those -I and -J and -L into the dsss.conf But dwt2 is not to be build itself by dsss. And it is not installed into dsss. |
April 06, 2009 Re: Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Frank Benoit | Hi Frank, I re-built DWT2 with rake clean all and everything went smoothly and successfully;But when I tried to build a my own pragram (testDWT2.d)which is placed in the C:\TangoD\dwt2\org.eclipse.jface.snippets\EclipseJfaceSnippets\org\eclipse\jface\snippets\viewers folder with the command:rake jfacesnippets,it failed with below error: C:\TangoD\dwt2>rake jfacesnippets (in C:/TangoD/dwt2) Building jfacesnippets[Snippet001TableViewer] dmd.exe @C:\TangoD\dwt2\rsp ...... Building jfacesnippets[testDWT2] dmd.exe @C:\TangoD\dwt2\rsp ppets\testDWT2.d: module testDWT2 cannot read file 'ppets\testDWT2.d' rake aborted! compile error C:/TangoD/dwt2/rakefile:274:in `buildApp' (See full trace by running task with --trace) I just have no idea how to compile my own program,although you have memtioned above,forgive me ! C:\TangoD\dwt2> > > 3.Is dssss still workable to compile DWT2 program? > > Yes, you can just put all those -I and -J and -L into the dsss.conf > But dwt2 is not to be build itself by dsss. And it is not installed into > dsss. > I read the dsss document and referred to the dwt-sample dssss.conf file in the previous DWT,and then tried below: My d folder now: c:\tangoD --------\dmd --------\dwt2 --------\dsss --------\dsss\bin --------\dsss\lib --------\dsss\include 1.Copy all dwt2 lib files into dsss\lib; 2.copy all dwt2 res files into dsss\lib\res; 3.copy all dwt2 imp files (that's \java folder and \org folder under dwt2\imp into dsss\include\d,dsss\include folder now looks like below: --------\dsss\include\d\java --------\dsss\include\d\org 4.In d:\dex where is my own d program files.Say,here is a d program name testDWT2.d; 5.write a dsss.conf and save in d:\dex,the content of d:\dex\dsss.conf is as below: # DWT dwt-samples top-level dsss.conf [*] buildflags+=-g -gc buildflags+=-J$LIB_PREFIX/res -Jres version(Windows) { # if no console window is wanted/needed use -version=gui version(gui) { buildflags+= -L/SUBSYSTEM:windows:5 } else { buildflags+= -L/SUBSYSTEM:console:5 } buildflags+= -L/rc:java buildflags+= -L/rc:org buildflags += -L"zlib;libbz2" } [testDWT2.d] version(DwtAddons){ [jface] type=subdir } 6.when I compile with dsss build testDWT2.d,dozens of error msg : D:\Laguage\Dex>dsss build testDWT2.d testDWT2.d => testDWT2 + c:\tangoD\dsss\bin\rebuild.exe -Idsss_imports\ -I. -S.\ -Ic:\tangoD\dsss\inclu de\d -Sc:\tangoD\dsss\lib\ -Ic:\tangoD\dsss\include\d -Sc:\tangoD\dsss\lib -oq dsss_objs\D testDWT2.d -oftestDWT2 c:/tangoD/dsss/bin\..\include\d\java\lang\util.di(296): Error: need -Jpath switc h to import text file org.eclipse.swt.internal.SWTMessages.properties c:/tangoD/dsss/bin\..\include\d\java\lang\util.di(296): Error: cannot evaluate o pCall("","org.eclipse.swt.internal.SWTMessages.properties") at compile time c:/tangoD/dsss/bin\..\include\d\java\lang\util.di(206): template instance java.l ang.util.getImportData!("org.eclipse.swt.internal.SWTMessages.properties") error instantiating c:/tangoD/dsss/bin\..\include\d\org\eclipse\swt\internal\Compatibility.di(206): Error: cannot evaluate opCall("","org.eclipse.swt.internal.SWTMessages.propertie s") at compile time Command c:\tangoD\dsss\bin\rebuild.exe returned with code 1, aborting. Error: Command failed, aborting. D:\Laguage\Dex> This is all what I have done with dsss+tango+dwt2 but it seems just what a mess.So it would be grateful if you would like to write a simple step by step guideline the newbies like me to set up a working environment as quickly as possible. Thanks and best regards, Sam |
April 07, 2009 ****Resent**** Need Help on Compiling DWT2 in XP | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sam Hu | Sam Hu Wrote:
> Hi Frank,
>
> I re-built DWT2 with rake clean all and everything went smoothly and successfully;But when I tried to build a my own pragram (testDWT2.d)which is placed in the C:\TangoD\dwt2\org.eclipse.jface.snippets\EclipseJfaceSnippets\org\eclipse\jface\snippets\viewers folder with the command:rake jfacesnippets,it failed with below error:
>
> C:\TangoD\dwt2>rake jfacesnippets
> (in C:/TangoD/dwt2)
> Building jfacesnippets[Snippet001TableViewer]
> dmd.exe @C:\TangoD\dwt2\rsp
> ......
> Building jfacesnippets[testDWT2]
> dmd.exe @C:\TangoD\dwt2\rsp
> ppets\testDWT2.d: module testDWT2 cannot read file 'ppets\testDWT2.d'
> rake aborted!
> compile error
> C:/TangoD/dwt2/rakefile:274:in `buildApp'
> (See full trace by running task with --trace)
>
> I just have no idea how to compile my own program,although you have memtioned above,forgive me ! C:\TangoD\dwt2>
> > > 3.Is dssss still workable to compile DWT2 program?
> >
> > Yes, you can just put all those -I and -J and -L into the dsss.conf
> > But dwt2 is not to be build itself by dsss. And it is not installed into
> > dsss.
> >
> I read the dsss document and referred to the dwt-sample dssss.conf file in the previous DWT,and then tried below:
> My d folder now:
> c:\tangoD
> --------\dmd
> --------\dwt2
> --------\dsss
> --------\dsss\bin
> --------\dsss\lib
> --------\dsss\include
> 1.Copy all dwt2 lib files into dsss\lib;
> 2.copy all dwt2 res files into dsss\lib\res;
> 3.copy all dwt2 imp files (that's \java folder and \org folder under dwt2\imp into dsss\include\d,dsss\include folder now looks like below:
> --------\dsss\include\d\java
> --------\dsss\include\d\org
> 4.In d:\dex where is my own d program files.Say,here is a d program name testDWT2.d; 5.write a dsss.conf and save in d:\dex,the content of d:\dex\dsss.conf is as below:
>
> # DWT dwt-samples top-level dsss.conf
>
> [*]
> buildflags+=-g -gc
> buildflags+=-J$LIB_PREFIX/res -Jres
>
> version(Windows) {
> # if no console window is wanted/needed use -version=gui
> version(gui) {
> buildflags+= -L/SUBSYSTEM:windows:5
> } else {
> buildflags+= -L/SUBSYSTEM:console:5
> }
> buildflags+= -L/rc:java
> buildflags+= -L/rc:org
> buildflags += -L"zlib;libbz2"
> }
>
>
> [testDWT2.d]
>
> version(DwtAddons){
> [jface]
> type=subdir
> }
> 6.when I compile with dsss build testDWT2.d,dozens of error msg :
>
> D:\Laguage\Dex>dsss build testDWT2.d
> testDWT2.d => testDWT2
> + c:\tangoD\dsss\bin\rebuild.exe -Idsss_imports\ -I. -S.\ -Ic:\tangoD\dsss\inclu
> de\d -Sc:\tangoD\dsss\lib\ -Ic:\tangoD\dsss\include\d -Sc:\tangoD\dsss\lib -oq
> dsss_objs\D testDWT2.d -oftestDWT2
> c:/tangoD/dsss/bin\..\include\d\java\lang\util.di(296): Error: need -Jpath switc
> h to import text file org.eclipse.swt.internal.SWTMessages.properties
> c:/tangoD/dsss/bin\..\include\d\java\lang\util.di(296): Error: cannot evaluate o
> pCall("","org.eclipse.swt.internal.SWTMessages.properties") at compile time
> c:/tangoD/dsss/bin\..\include\d\java\lang\util.di(206): template instance java.l
> ang.util.getImportData!("org.eclipse.swt.internal.SWTMessages.properties") error
> instantiating
> c:/tangoD/dsss/bin\..\include\d\org\eclipse\swt\internal\Compatibility.di(206):
> Error: cannot evaluate opCall("","org.eclipse.swt.internal.SWTMessages.propertie
> s") at compile time
> Command c:\tangoD\dsss\bin\rebuild.exe returned with code 1, aborting.
> Error: Command failed, aborting.
>
> D:\Laguage\Dex>
>
> This is all what I have done with dsss+tango+dwt2 but it seems just what a mess.So it would be grateful if you would like to write a simple step by step guideline the newbies like me to set up a working environment as quickly as possible.
>
> Thanks and best regards,
> Sam
>
>
|
Copyright © 1999-2021 by the D Language Foundation