Thread overview | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
May 25, 2009 Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Hi everyone! I installed LDC on my Ubuntu 9.04/x86-64 system from the Launchpad Apt repository. So far it works great, but debugging is strange. I compile using ldc -g -debug test.d which should add symbolic debugger information to the executable, but when I run 'list' in gdb (original Debian/Ubuntu version as well as a self-compiled version with the current D patches) subsequently, I won't be shown the compiled source code, but obviously code from a lower level, which looks like 159 */ 160 int main(char[][] args); 161 162 /*********************************** 163 * Substitutes for the C main() function. 164 * It's purpose is to wrap the call to the D main() 165 * function and catch any unhandled exceptions. 166 */ 167 168 extern (C) int main(int argc, char **argv, char** env) (gdb) 169 { (...) Is there any way to fix this? Do I need other parameters to compile? Best regards, Timo |
May 25, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Timo Gransch | Hi, I'm also looking forward to using debugger on Linux!
Timo Gransch wrote:
> I compile using
>
> ldc -g -debug test.d
Earlier this month I tried to debug LDC-compiled programs with llvm-db, the LLVM debugger, on Ubuntu. It seems to be immature, unfortunately:
% ldc -g ./resauth.d
% ./resauth
<<works correctly>>
% llvm-db ./resauth
NOTE: llvm-db is known useless right now.
llvm-db: The LLVM source-level debugger
Loading program... Error: Could not find program './resauth'!
(llvm-db) %
The llvm-db is installed with "sudo apt-get install llvm". Perhaps a newer llvm-db is usable, I haven't tried.
|
May 25, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to MIURA Masahiro | MIURA Masahiro schrieb:
> Hi, I'm also looking forward to using debugger on Linux!
I tried dmd 1.045 on Arch Linux/i386 yesterday, and at least for my small test, debugging with gdb worked OK with Phobos. But when I switched to Tango, I got strange results again.
It's really a pity. These debugger issues on Linux keep me from using D for my private projects up to now.
Best regards,
Timo
|
May 25, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Timo Gransch | Timo Gransch wrote:
> Hi everyone!
>
> I installed LDC on my Ubuntu 9.04/x86-64 system from the Launchpad Apt
> repository. So far it works great, but debugging is strange.
>
> I compile using
>
> ldc -g -debug test.d
>
> which should add symbolic debugger information to the executable, but
> when I run 'list' in gdb (original Debian/Ubuntu version as well as a
> self-compiled version with the current D patches) subsequently, I won't
> be shown the compiled source code, but obviously code from a lower
> level, which looks like
>
> 159 */
> 160 int main(char[][] args);
> 161
> 162 /***********************************
> 163 * Substitutes for the C main() function.
> 164 * It's purpose is to wrap the call to the D main()
> 165 * function and catch any unhandled exceptions.
> 166 */
> 167
> 168 extern (C) int main(int argc, char **argv, char** env)
> (gdb)
> 169 {
> (...)
>
> Is there any way to fix this? Do I need other parameters to compile?
>
> Best regards,
> Timo
Actually, I believe this is right. If you look in runtime/internal/dmain2.d:168, you will see that exact function. You will also see that it calls _Dmain (what you know as main()) further down in the function as a delegate. I have not had this issue when compiling with ldc, but the solution is probably to break at _Dmain rather than main. Another solution would be to compile the runtime without debug information, then gdb will use _Dmain anyway, as it is the first point it encounters debug info (This is probably why I don't have this issue, my runtime is compiled in release mode).
You might want to try updating ldc to one of the nightly builds (or 0.9.1 when it's released), as debugging info is vastly improved over that of 0.9. Note that you should use ldmd instead of ldc when this happens (or learn the new syntax for ldc), as ldc has switched to llvm for command line parsing instead of dmd. This means -debug and -version (as well as a few others) will function differently unless you use ldmd.
|
May 25, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Robert Clipsham | Robert Clipsham schrieb:
> Another solution would be to compile the runtime
> without debug information, then gdb will use _Dmain anyway, as it is the
> first point it encounters debug info (This is probably why I don't have
> this issue, my runtime is compiled in release mode).
Thanks a lot for your help, Robert.
I tried to compile ldc and the runtime (checked out from trunk) in release mode, too, but it seems that I did something wrong.
In the ccmake interface, I set CMAKE_BUILD_TYPE to Release and removed the -g switch from D_FLAGS (leaving -w;-d). After building, I compiled my test programm using
ldmd -g -debug test.d
When running list in gdb, I got
(gdb) list
1 ../sysdeps/x86_64/elf/start.S: No such file or directory.
in ../sysdeps/x86_64/elf/start.S
When leaving the -g switch in D_FLAGS, list in gdb will show me the contents of dmain2.d again.
Do I have to change any other configuration flags?
Best regards,
Timo
|
May 25, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Timo Gransch | Timo Gransch wrote:
> Do I have to change any other configuration flags?
Not as far as I'm aware. You could try using -O;-release to see if that makes a difference, but I don't know why you would get that error.
|
May 26, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Timo Gransch | Timo Gransch wrote: > I tried dmd 1.045 on Arch Linux/i386 yesterday, and at least for my small test, debugging with gdb worked OK with Phobos. But when I switched to Tango, I got strange results again. Hmm, I have failed using the patched GDB with DMD1/Phobos and DMD1/Tango. Now I should make one more try. > It's really a pity. These debugger issues on Linux keep me from using D for my private projects up to now. I sympathize with you. Ironically, Walter has a policy to listen to enhancement requests only from actual users. A chicken/egg problem. So I chose to go with D2 without any debugger. |
May 30, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Timo Gransch | (Discussion about debugging ldc/x86-64 executables moved from digitalmars.D.announce) Christian Kamm wrote: > can you try to make a breakpoint on the first line of your D main function (i.e. b myfile.d:15) and run to that? (gdb) break test.d:5 Breakpoint 1 at 0x401e69: file test.d, line 5. (gdb) run Starting program: /home/timo/tmp/testd/test [Thread debugging using libthread_db enabled] [New Thread 0x7f0ce23146f0 (LWP 16164)] [Switching to Thread 0x7f0ce23146f0 (LWP 16164)] Breakpoint 1, D main (args={"/home/timo/tmp/testd/test"}) at test.d:5 5 for (int i = 0; i < args.length; i++) Current language: auto; currently d (gdb) step 7 Cout(args[i] ~ "\n"); (gdb) step 0x00000000004052e0 in _d_newarrayvT () Current language: auto; currently asm (gdb) step Single stepping until exit from function _d_newarrayvT, which has no line number information. 0x0000000000409ef0 in typeinfo.ti_Ag.TypeInfo_Aa.next() () Best regards and thanks, Timo |
May 30, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Timo Gransch | Timo Gransch wrote:
> Breakpoint 1, D main (args={"/home/timo/tmp/testd/test"}) at test.d:5
> 5 for (int i = 0; i < args.length; i++)
> Current language: auto; currently d
> (gdb) step
> 7 Cout(args[i] ~ "\n");
> (gdb) step
> 0x00000000004052e0 in _d_newarrayvT ()
> Current language: auto; currently asm
> (gdb) step
> Single stepping until exit from function _d_newarrayvT,
> which has no line number information.
> 0x0000000000409ef0 in typeinfo.ti_Ag.TypeInfo_Aa.next() ()
Well, that's what you would expect if you step into that line. Use 'next' to step over the runtime function calls hidden in that line.
Regards,
Christian
|
June 01, 2009 Re: Debugging LDC executables | ||||
---|---|---|---|---|
| ||||
Posted in reply to Christian Kamm | Christian Kamm schrieb: > Well, that's what you would expect if you step into that line. Use 'next' to step over the runtime function calls hidden in that line. Is it really intended that gdb tries to step into runtime functions which have no debug information if I use 'step'? As you might have realized, I'm not an expert in using the gdb command line (I prefer to debug from my IDE), but if I run gdb on a C program compiled with gcc, 'step' stops at the lowest level of my own code. The result is the same if I use 'next': (gdb) break test.d:5 Breakpoint 1 at 0x401e69: file test.d, line 5. (gdb) run Starting program: /home/timo/tmp/testd/test [Thread debugging using libthread_db enabled] [New Thread 0x7fe5e63146f0 (LWP 27517)] [Switching to Thread 0x7fe5e63146f0 (LWP 27517)] Breakpoint 1, D main (args={"/home/timo/tmp/testd/test"}) at test.d:5 5 for (int i = 0; i < args.length; i++) Current language: auto; currently d (gdb) next 7 Cout(args[i] ~ "\n"); (gdb) next 0x00000000004052e0 in _d_newarrayvT () Current language: auto; currently asm (gdb) next Single stepping until exit from function _d_newarrayvT, which has no line number information. 0x0000000000409ef0 in typeinfo.ti_Ag.TypeInfo_Aa.next() () (gdb) next Single stepping until exit from function _D8typeinfo5ti_Ag11TypeInfo_Aa4nextMFZC8TypeInfo, which has no line number information. 0x00000000004052f4 in _d_newarrayvT () Best regards, Timo |
Copyright © 1999-2021 by the D Language Foundation