Thread overview | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
September 04, 2012 scope for array parameters | ||||
---|---|---|---|---|
| ||||
To make functions definitions more expressive and give the compiler more information to optimize I propose to make array function parameters extendable with 'scope' such as follows: size_t find(scope float[] haystack, float needle){ ... } This would give the compiler the information that the array haystack only has to be valid as long as the scope of the function find is valid. As soon as the function scope is left, the array does not need to be valid any more. This would greatly help when programming without a GC to know, if the array one passes to the function will be saved internally or if it only needs to be valid for the duration in which the function is executed. Also it would allow the compiler to optimize array literals such as: find([1,2,3,4,5], 5) The function call would not allocate on the heap, but would allocate the array literal on the stack, as the compiler knows that is only has to be valid for the scope of find. Passing a scope array to another function which does not have the scope annotation should be an error. Assining a a scope array to a non local variable should be an error too. You could go really fancy on checking scoped function parameters but for a start simple rules should be enough. The same could be done with references and pointers. The purpose of this would be to allow the compiler to do more static checking on the usage of the passed arguments and make the function definitions contain information if the passed references will be saved internally or not. I do understand that non-gc programming is not considered often for the D-Programming Language, but it would be nice if this idea does not get ignored completely. What do you think about this idea? Kind Regards Benjamin Thaut |
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to Benjamin Thaut | On 04-09-2012 22:13, Benjamin Thaut wrote: > To make functions definitions more expressive and give the compiler more > information to optimize I propose to make array function parameters > extendable with 'scope' such as follows: > > size_t find(scope float[] haystack, float needle){ ... } > > This would give the compiler the information that the array haystack > only has to be valid as long as the scope of the function find is valid. > As soon as the function scope is left, the array does not need to be > valid any more. This would greatly help when programming without a GC to > know, if the array one passes to the function will be saved internally > or if it only needs to be valid for the duration in which the function > is executed. Also it would allow the compiler to optimize array literals > such as: > > find([1,2,3,4,5], 5) > > The function call would not allocate on the heap, but would allocate the > array literal on the stack, as the compiler knows that is only has to be > valid for the scope of find. > > Passing a scope array to another function which does not have the scope > annotation should be an error. Assining a a scope array to a non local > variable should be an error too. You could go really fancy on checking > scoped function parameters but for a start simple rules should be enough. > > The same could be done with references and pointers. The purpose of this > would be to allow the compiler to do more static checking on the usage > of the passed arguments and make the function definitions contain > information if the passed references will be saved internally or not. > > I do understand that non-gc programming is not considered often for the > D-Programming Language, but it would be nice if this idea does not get > ignored completely. > > What do you think about this idea? > > Kind Regards > Benjamin Thaut This is already what scope does today. See http://dlang.org/function.html: "references in the parameter cannot be escaped (e.g. assigned to a global variable)" It's just that the compiler doesn't actually enforce it fully. -- Alex Rønne Petersen alex@lycus.org http://lycus.org |
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to Alex Rønne Petersen | Am 04.09.2012 22:18, schrieb Alex Rønne Petersen:
> On 04-09-2012 22:13, Benjamin Thaut wrote:
> This is already what scope does today. See http://dlang.org/function.html:
>
> "references in the parameter cannot be escaped (e.g. assigned to a
> global variable)"
>
> It's just that the compiler doesn't actually enforce it fully.
>
Does the compiler already use this information to optimize array literals?
Kind Regards
Benjamin Thaut
|
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to Benjamin Thaut | On Tuesday, September 04, 2012 22:19:55 Benjamin Thaut wrote:
> Am 04.09.2012 22:18, schrieb Alex Rønne Petersen:
> > On 04-09-2012 22:13, Benjamin Thaut wrote:
> > This is already what scope does today. See http://dlang.org/function.html:
> >
> > "references in the parameter cannot be escaped (e.g. assigned to a
> > global variable)"
> >
> > It's just that the compiler doesn't actually enforce it fully.
>
> Does the compiler already use this information to optimize array literals?
It had better not (I doubt that it does though). Unless scope is actually properly enforced, then you're going to have major bugs if you use scope and then escape references to that data anyway. And without the compiler checks, that _will_ happen (especially when some folks use in all over the place).
Once scope is properly enforced, then optimizing based on it would be great, but until it is, it's a _bad_ idea.
- Jonathan M Davis
|
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to Benjamin Thaut | On Tuesday, September 04, 2012 22:13:44 Benjamin Thaut wrote:
> What do you think about this idea?
scope on function parameters is supposed to prevent any reference to that data escaping from the function. e.g. scope on a delegate would make it an error to assign that delegate to anything which could escape the function. It is my understanding that this is also supposed to include arrays such that if you mark an array parameter with scope, it should be illegal for any references to it (including slices of it or references to its elements) to escape the function, which _would_ allow compiler optimizations. But the compiler doesn't seem to properly check for much with regards to scope right now. A _lot_ of code is going to break once it does, particularly since some people seem to think that it's a good idea to use in (which is the same as const scope) everywhere.
- Jonathan M Davis
|
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to Jonathan M Davis | Jonathan M Davis:
> Once scope is properly enforced, then optimizing based on it would be great, but until it is, it's a _bad_ idea.
Today we use "in" often for function arguments, and it implies "scope". Surely some of those programs use the arguments wrongly, this means they probably sometime escape. So are those programs someday going to become compilation errors? For the "-property" and for the arguments of delegate/function pointers the idea of turning some code currently used in errors is failing...
Such things need to be implemented early in a language.
Bye,
bearophile
|
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to bearophile | On Tuesday, 4 September 2012 at 21:41:58 UTC, bearophile wrote: > Jonathan M Davis: > >> Once scope is properly enforced, then optimizing based on it would be great, but until it is, it's a _bad_ idea. > > Today we use "in" often for function arguments, and it implies "scope". Surely some of those programs use the arguments wrongly, this means they probably sometime escape. So are those programs someday going to become compilation errors? Yep. > Such things need to be implemented early in a language. Yep. It's very unfortunate because it puts us in a lose-lose situations where we can't fix the language without breaking people's code. I think the best course of action is to fix these things as soon as possible and get the problem out of the way. |
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to Peter Alexander | On Tuesday, September 04, 2012 23:57:24 Peter Alexander wrote:
> It's very unfortunate because it puts us in a lose-lose situations where we can't fix the language without breaking people's code. I think the best course of action is to fix these things as soon as possible and get the problem out of the way.
Indeed. The same goes for stuff like deprecating things that we've long said was going to be deprecated but hasn't yet been deprecated (e.g. delete). Lots of code is going to break when it happens, and the longer that we wait, the worse it's going to be. But until someone takes the time to fix it (and Walter is constantly busy on other things), it's not going to happen, which is obviously a big problem.
- Jonathan M Davis
|
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to bearophile | On Tuesday, September 04, 2012 23:42:33 bearophile wrote:
> Jonathan M Davis:
> > Once scope is properly enforced, then optimizing based on it would be great, but until it is, it's a _bad_ idea.
>
> Today we use "in" often for function arguments, and it implies
> "scope". Surely some of those programs use the arguments wrongly,
> this means they probably sometime escape. So are those programs
> someday going to become compilation errors? For the "-property"
> and for the arguments of delegate/function pointers the idea of
> turning some code currently used in errors is failing...
> Such things need to be implemented early in a language.
That's part of why I keep saying not to use in whenever it comes up. scope is very broken, so in is very broken. And honestly, given how often arrays are used in structs, I suspect that it's not at all uncommon for in to be used incorrectly.
I'd actually argue to _never_ to use in at this point. If you want const, then use const. If you want scope, then use scope. But using scope on anything which isn't checked properly by the compiler is just asking for it. You _will_ have code that breaks when scope is fixed. I believe that the only case that has _any_ protection at all with scope right now is delegates, which almost never should be const. So, using in makes little to no sense to me.
- Jonathan M Davis
|
September 04, 2012 Re: scope for array parameters | ||||
---|---|---|---|---|
| ||||
Posted in reply to bearophile | What does -property supposedly solve? It creates a horrid mess of brackets that ruin the elegance of UFCS code. |
Copyright © 1999-2021 by the D Language Foundation