Thread overview | ||||||||
---|---|---|---|---|---|---|---|---|
|
August 21, 2017 cv2pdb: cannot add symbols to module, probably msobj140.dll missing | ||||
---|---|---|---|---|
| ||||
All of a sudden I'm getting this error. All I did was comment out a huge block of code so I could check something. The code compiles but the pdb conversion gives me that error ;/ Uncommenting out the code allows it to work again. I can't see why the code I'm commenting out would give that error ;/ Deleting the code also produces the same result. It seems to be in use with GTK and event handlers. The handlers are completely isolated yet are somehow causing the problem. You won't believe this, I'm sure, but //Dialog.addOnDestroy((Widget w) { }); causes the error! Must be some serious bug! Uncommenting allows the code to build fine. I tried restarting visual D with no luck ;/ |
August 21, 2017 Re: cv2pdb: cannot add symbols to module, probably msobj140.dll missing | ||||
---|---|---|---|---|
| ||||
Posted in reply to Johnson | On Monday, 21 August 2017 at 03:18:38 UTC, Johnson wrote:
> All of a sudden I'm getting this error. All I did was comment out a huge block of code so I could check something. The code compiles but the pdb conversion gives me that error ;/
>
> Uncommenting out the code allows it to work again. I can't see why the code I'm commenting out would give that error ;/
>
> Deleting the code also produces the same result.
>
> It seems to be in use with GTK and event handlers. The handlers are completely isolated yet are somehow causing the problem.
>
> You won't believe this, I'm sure, but
>
> //Dialog.addOnDestroy((Widget w) { });
>
> causes the error! Must be some serious bug! Uncommenting allows the code to build fine.
>
> I tried restarting visual D with no luck ;/
This just started happening too and a few hours ago I upgraded VS, so maybe the msobj140.dll changed and broke cv2pdb? I copied it to the cv2pdb dir so it should have no trouble finding it. I've also cleaned the dir. It seems it's doing it on about everything I change. Going to reboot to see if that helps.
|
August 21, 2017 Re: cv2pdb: cannot add symbols to module, probably msobj140.dll missing | ||||
---|---|---|---|---|
| ||||
Posted in reply to Johnson |
On 21.08.2017 05:24, Johnson wrote:
> On Monday, 21 August 2017 at 03:18:38 UTC, Johnson wrote:
>> All of a sudden I'm getting this error. All I did was comment out a huge block of code so I could check something. The code compiles but the pdb conversion gives me that error ;/
>>
>> Uncommenting out the code allows it to work again. I can't see why the code I'm commenting out would give that error ;/
>>
>> Deleting the code also produces the same result.
>>
>> It seems to be in use with GTK and event handlers. The handlers are completely isolated yet are somehow causing the problem.
>>
>> You won't believe this, I'm sure, but
>>
>> //Dialog.addOnDestroy((Widget w) { });
>>
>> causes the error! Must be some serious bug! Uncommenting allows the code to build fine.
>>
>> I tried restarting visual D with no luck ;/
>
> This just started happening too and a few hours ago I upgraded VS, so maybe the msobj140.dll changed and broke cv2pdb? I copied it to the cv2pdb dir so it should have no trouble finding it. I've also cleaned the dir. It seems it's doing it on about everything I change. Going to reboot to see if that helps.
>
Unfortunately, the VS2017 15.3.1 update seems to cause quite some trouble. Bad linker (breaks TLS), bad vcvars*.bat (change current directory), and this issue, too.
I guess they changed something about the (undocumented) interface to the respective DLLs.
|
August 21, 2017 Re: cv2pdb: cannot add symbols to module, probably msobj140.dll missing | ||||
---|---|---|---|---|
| ||||
Posted in reply to Rainer Schuetze | On Monday, 21 August 2017 at 06:16:49 UTC, Rainer Schuetze wrote:
>
>
> On 21.08.2017 05:24, Johnson wrote:
>> On Monday, 21 August 2017 at 03:18:38 UTC, Johnson wrote:
>>> [...]
>>
>> This just started happening too and a few hours ago I upgraded VS, so maybe the msobj140.dll changed and broke cv2pdb? I copied it to the cv2pdb dir so it should have no trouble finding it. I've also cleaned the dir. It seems it's doing it on about everything I change. Going to reboot to see if that helps.
>>
>
> Unfortunately, the VS2017 15.3.1 update seems to cause quite some trouble. Bad linker (breaks TLS), bad vcvars*.bat (change current directory), and this issue, too.
>
> I guess they changed something about the (undocumented) interface to the respective DLLs.
;/ That sucks ;/
I guess I might just have to install VS2015, or does that have issues too?
Any idea what might be the best VS version that is most compatible with Visual D?
|
August 22, 2017 Re: cv2pdb: cannot add symbols to module, probably msobj140.dll missing | ||||
---|---|---|---|---|
| ||||
Posted in reply to Johnson | On 22.08.2017 01:27, Johnson wrote: > On Monday, 21 August 2017 at 06:16:49 UTC, Rainer Schuetze wrote: >> >> >> On 21.08.2017 05:24, Johnson wrote: >>> On Monday, 21 August 2017 at 03:18:38 UTC, Johnson wrote: >>>> [...] >>> >>> This just started happening too and a few hours ago I upgraded VS, so maybe the msobj140.dll changed and broke cv2pdb? I copied it to the cv2pdb dir so it should have no trouble finding it. I've also cleaned the dir. It seems it's doing it on about everything I change. Going to reboot to see if that helps. >>> >> >> Unfortunately, the VS2017 15.3.1 update seems to cause quite some trouble. Bad linker (breaks TLS), bad vcvars*.bat (change current directory), and this issue, too. >> >> I guess they changed something about the (undocumented) interface to the respective DLLs. > > ;/ That sucks ;/ > > I guess I might just have to install VS2015, or does that have issues too? > > Any idea what might be the best VS version that is most compatible with Visual D? VS2013 and VS2015 should both be fine. Building Visual D is also tested on Appveyor for both, too: https://ci.appveyor.com/project/rainers/visuald |
August 22, 2017 Re: cv2pdb: cannot add symbols to module, probably msobj140.dll missing | ||||
---|---|---|---|---|
| ||||
Posted in reply to Rainer Schuetze | On Tuesday, 22 August 2017 at 05:57:20 UTC, Rainer Schuetze wrote:
>
>
> On 22.08.2017 01:27, Johnson wrote:
>> On Monday, 21 August 2017 at 06:16:49 UTC, Rainer Schuetze wrote:
>>>
>>>
>>> On 21.08.2017 05:24, Johnson wrote:
>>>>[...]
>>>
>>> Unfortunately, the VS2017 15.3.1 update seems to cause quite some trouble. Bad linker (breaks TLS), bad vcvars*.bat (change current directory), and this issue, too.
>>>
>>> I guess they changed something about the (undocumented) interface to the respective DLLs.
>>
>> ;/ That sucks ;/
>>
>> I guess I might just have to install VS2015, or does that have issues too?
>>
>> Any idea what might be the best VS version that is most compatible with Visual D?
>
> VS2013 and VS2015 should both be fine. Building Visual D is also tested on Appveyor for both, too: https://ci.appveyor.com/project/rainers/visuald
Ok, I'll try VS2013. Maybe it will be the most stable. Hopefully I can run them side by side without issues.
|
Copyright © 1999-2021 by the D Language Foundation