Thread overview | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
August 21, 2012 Wiki updates | ||||
---|---|---|---|---|
| ||||
I restructured the http://gdcproject.org/wiki/Installation page, I hope it's OK this way. I also added a Raspberry Pi overview page http://gdcproject.org/wiki/Raspberry Pi and a new installation guide for raspbian http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat would be great if someone could test the raspbian guide and report any success or failures. It works for me, but I'm not sure if I forgot to document some details. @Iain the home page (http://gdcproject.org/wiki/Home) could need some small updates: Frontend version still says 2.059 and links to the 2.057 changelog. There are still some references to the old issue tracker: "A bug, proposal, or enhancement can go to the issue tracker on bitbucket." "This list is still maintained, however, new bugs should be submitted to the Bitbucket repository." And this should probably be changed to refer to git commits: "Include the hg changeset or commit you are using for GDC. (e.g. commit 114 or changset 6f03952ff48f)" If you give me permission to edit the home page (user JohannesPfau) I can fix those, if not that's fine as well ;-) BTW: Would it be possible to add links to the gdcproject.org main page, github repository, bug tracker and D.gnu forum to the wiki Quick links list? |
August 22, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Johannes Pfau | On Tuesday, 21 August 2012 at 19:01:17 UTC, Johannes Pfau wrote:
> I restructured the http://gdcproject.org/wiki/Installation page, I hope
> it's OK this way.
>
> I also added a Raspberry Pi overview page
> http://gdcproject.org/wiki/Raspberry Pi and a new installation guide
> for raspbian
> http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
> would be great if someone could test the raspbian guide and report any
> success or failures. It works for me, but I'm not sure if I forgot to
> document some details.
>
> @Iain the home page (http://gdcproject.org/wiki/Home) could need some
> small updates:
>
> Frontend version still says 2.059 and links to the 2.057 changelog.
>
> There are still some references to the old issue tracker:
> "A bug, proposal, or enhancement can go to the issue tracker on
> bitbucket."
> "This list is still maintained, however, new bugs should be submitted
> to the Bitbucket repository."
>
> And this should probably be changed to refer to git commits:
> "Include the hg changeset or commit you are using for GDC. (e.g. commit
> 114 or changset 6f03952ff48f)"
>
> If you give me permission to edit the home page (user JohannesPfau) I
> can fix those, if not that's fine as well ;-)
>
> BTW:
> Would it be possible to add links to the gdcproject.org main page,
> github repository, bug tracker and D.gnu forum to the wiki Quick links
> list?
Fixed them - mostly. I see a bit of spam has creeped in (oh noes!). This might take me an hour to clean out as I can't seem to remove pages in bulk.
In the meantime, I have added some silly textcha's - so sorry for the inconvenience!
I could certainly add you to an admin group if only I knew how. :-)
Regards
Iain
|
August 22, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Iain Buclaw | On Wednesday, 22 August 2012 at 13:51:12 UTC, Iain Buclaw wrote:
> On Tuesday, 21 August 2012 at 19:01:17 UTC, Johannes Pfau wrote:
>> I restructured the http://gdcproject.org/wiki/Installation page, I hope
>> it's OK this way.
>>
>> I also added a Raspberry Pi overview page
>> http://gdcproject.org/wiki/Raspberry Pi and a new installation guide
>> for raspbian
>> http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
>> would be great if someone could test the raspbian guide and report any
>> success or failures. It works for me, but I'm not sure if I forgot to
>> document some details.
>>
>> @Iain the home page (http://gdcproject.org/wiki/Home) could need some
>> small updates:
>>
>> Frontend version still says 2.059 and links to the 2.057 changelog.
>>
>> There are still some references to the old issue tracker:
>> "A bug, proposal, or enhancement can go to the issue tracker on
>> bitbucket."
>> "This list is still maintained, however, new bugs should be submitted
>> to the Bitbucket repository."
>>
>> And this should probably be changed to refer to git commits:
>> "Include the hg changeset or commit you are using for GDC. (e.g. commit
>> 114 or changset 6f03952ff48f)"
>>
>> If you give me permission to edit the home page (user JohannesPfau) I
>> can fix those, if not that's fine as well ;-)
>>
>> BTW:
>> Would it be possible to add links to the gdcproject.org main page,
>> github repository, bug tracker and D.gnu forum to the wiki Quick links
>> list?
>
>
> Fixed them - mostly. I see a bit of spam has creeped in (oh noes!). This might take me an hour to clean out as I can't seem to remove pages in bulk.
>
> In the meantime, I have added some silly textcha's - so sorry for the inconvenience!
>
> I could certainly add you to an admin group if only I knew how. :-)
>
> Regards
> Iain
OK, worked out how to remove them in bulk. If anyone was zealous enough to create a page in their own name, I'm sorry but you've have your account removed. :P
|
August 22, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Johannes Pfau | Am 21.08.2012 21:01, schrieb Johannes Pfau: > I restructured the http://gdcproject.org/wiki/Installation page, I hope > it's OK this way. > > I also added a Raspberry Pi overview page > http://gdcproject.org/wiki/Raspberry Pi and a new installation guide > for raspbian > http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat > would be great if someone could test the raspbian guide and report any > success or failures. It works for me, but I'm not sure if I forgot to > document some details. Thanks a lot for this - it would have taken ages for me to trace that stuff down. Not sure if this is necessary, but I also installed 'patchutils' because "rules clean" complained about 'lsdiff' missing. However, I'm now still getting the error below. PS: the wiki page seems to have been deleted during the spam clean up. If you need the contents of the raspian_hardfloat page, the page is still open in my browser so I can still copy them out. --- (...) arm-linux-gnueabihf-gcc -c -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wold-style-definition -Wc++-compat -fno-common -DHAVE_CONFIG_H -I. -Ilto -I../../../gcc-4.7-4.7.1/src/gcc -I../../../gcc-4.7-4.7.1/src/gcc/lto -I../../../gcc-4.7-4.7.1/src/gcc/../include -I../../../gcc-4.7-4.7.1/src/gcc/../libcpp/include -I../../../gcc-4.7-4.7.1/src/gcc/../libdecnumber -I../../../gcc-4.7-4.7.1/src/gcc/../libdecnumber/dpd -I../libdecnumber ../../../gcc-4.7-4.7.1/src/gcc/lto/lto-object.c -o lto/lto-object.o arm-linux-gnueabihf-gcc -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wold-style-definition -Wc++-compat -fno-common -DHAVE_CONFIG_H -o lto1 \ lto/lto-lang.o lto/lto.o lto/lto-object.o attribs.o main.o tree-browser.o libbackend.a libcommon-target.a libcommon.a ../libcpp/libcpp.a ../libdecnumber/libdecnumber.a -lmpc -lmpfr -lgmp -rdynamic -ldl -lz libcommon.a ../libcpp/libcpp.a ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a (echo "@set version-GCC 4.7.1"; \ if [ "" = "experimental" ]; \ then echo "@set DEVELOPMENT"; \ else echo "@clear DEVELOPMENT"; \ fi) > gcc-vers.texiT echo @set srcdir /home/pi/develop/GDC/objdir/gcc/../../../gcc-4.7-4.7.1/src/gcc >> gcc-vers.texiT if [ -n "(GCC) " ]; then \ echo "@set VERSION_PACKAGE (GCC) " >> gcc-vers.texiT; \ fi echo "@set BUGURL @uref{http://gcc.gnu.org/bugs.html}" >> gcc-vers.texiT; \ mv -f gcc-vers.texiT gcc-vers.texi echo timestamp > gcc.pod perl ../../../gcc-4.7-4.7.1/src/gcc/../contrib/texi2pod.pl ../../../gcc-4.7-4.7.1/src/gcc/doc/invoke.texi > gcc.pod No filename or title make[2]: [gcc.pod] Error 255 (ignored) echo timestamp > doc/gcc.1 (pod2man --center="GNU" --release="gcc-4.7.1" --date=2012-06-14 --section=1 gcc.pod > doc/gcc.1.T$$ && \ mv -f doc/gcc.1.T$$ doc/gcc.1) || \ (rm -f doc/gcc.1.T$$ && exit 1) echo timestamp > gpl.pod perl ../../../gcc-4.7-4.7.1/src/gcc/../contrib/texi2pod.pl ../../../gcc-4.7-4.7.1/src/gcc/doc/include/gpl_v3.texi > gpl.pod echo timestamp > doc/gpl.7 (pod2man --center="GNU" --release="gcc-4.7.1" --date=2012-06-14 --section=7 gpl.pod > doc/gpl.7.T$$ && \ mv -f doc/gpl.7.T$$ doc/gpl.7) || \ (rm -f doc/gpl.7.T$$ && exit 1) rm gcc.pod make[2]: Leaving directory `/home/pi/develop/GDC/objdir/gcc' Checking multilib configuration for libgcc... mkdir -p -- arm-linux-gnueabihf/libgcc Configuring in arm-linux-gnueabihf/libgcc configure: creating cache ./config.cache checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for --enable-version-specific-runtime-libs... no checking for a BSD-compatible install... /usr/bin/install -c checking for gawk... mawk checking for arm-linux-gnueabihf-ar... ar checking for arm-linux-gnueabihf-lipo... lipo checking for arm-linux-gnueabihf-nm... /home/pi/develop/GDC/objdir/./gcc/nm checking for arm-linux-gnueabihf-ranlib... ranlib checking for arm-linux-gnueabihf-strip... strip checking whether ln -s works... yes checking for arm-linux-gnueabihf-gcc... /home/pi/develop/GDC/objdir/./gcc/xgcc -B/home/pi/develop/GDC/objdir/./gcc/ -B/opt/gdc/arm-linux-gnueabihf/bin/ -B/opt/gdc/arm-linux-gnueabihf/lib/ -isystem /opt/gdc/arm-linux-gnueabihf/include -isystem /opt/gdc/arm-linux-gnueabihf/sys-include checking for suffix of object files... configure: error: in `/home/pi/develop/GDC/objdir/arm-linux-gnueabihf/libgcc': configure: error: cannot compute suffix of object files: cannot compile See `config.log' for more details. make[1]: *** [configure-target-libgcc] Error 1 make[1]: Leaving directory `/home/pi/develop/GDC/objdir' make: *** [all] Error 2 |
August 22, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sönke Ludwig | Am Wed, 22 Aug 2012 21:50:58 +0200 schrieb Sönke Ludwig <sludwig@outerproduct.org>: > Am 21.08.2012 21:01, schrieb Johannes Pfau: > > I restructured the http://gdcproject.org/wiki/Installation page, I hope it's OK this way. > > > > I also added a Raspberry Pi overview page http://gdcproject.org/wiki/Raspberry Pi and a new installation guide for raspbian http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat would be great if someone could test the raspbian guide and report any success or failures. It works for me, but I'm not sure if I forgot to document some details. > > Thanks a lot for this - it would have taken ages for me to trace that stuff down. > > Not sure if this is necessary, but I also installed 'patchutils' because "rules clean" complained about 'lsdiff' missing. > > However, I'm now still getting the error below. > > PS: the wiki page seems to have been deleted during the spam clean up. If you need the contents of the raspian_hardfloat page, the page is still open in my browser so I can still copy them out. > I moved the page, seems the wiki doesn't add a redirect automatically. The new url is http://gdcproject.org/wiki/Raspberry%20Pi/build/Raspbian%28Hardfloat%29 but it's also linked from the Install page. > --- > > (...) Could you post /home/pi/develop/GDC/objdir/arm-linux-gnueabihf/libgcc/config.log please? |
August 22, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Johannes Pfau Attachments: | >> PS: the wiki page seems to have been deleted during the spam clean up. If you need the contents of the raspian_hardfloat page, the page is still open in my browser so I can still copy them out. >> > > I moved the page, seems the wiki doesn't add a redirect automatically. The new url is http://gdcproject.org/wiki/Raspberry%20Pi/build/Raspbian%28Hardfloat%29 but it's also linked from the Install page. > Ok, I see. I was quickly searching for a way on the wiki to the page but did just look in the developer section. > > Could you > post /home/pi/develop/GDC/objdir/arm-linux-gnueabihf/libgcc/config.log > please? > > Attached. |
August 22, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Iain Buclaw | On Wednesday, 22 August 2012 at 14:17:16 UTC, Iain Buclaw wrote:
> On Wednesday, 22 August 2012 at 13:51:12 UTC, Iain Buclaw wrote:
>> On Tuesday, 21 August 2012 at 19:01:17 UTC, Johannes Pfau wrote:
>>> I restructured the http://gdcproject.org/wiki/Installation page, I hope
>>> it's OK this way.
>>>
>>> I also added a Raspberry Pi overview page
>>> http://gdcproject.org/wiki/Raspberry Pi and a new installation guide
>>> for raspbian
>>> http://gdcproject.org/wiki/Raspberry%20Pi/build/raspbian_hardfloat
>>> would be great if someone could test the raspbian guide and report any
>>> success or failures. It works for me, but I'm not sure if I forgot to
>>> document some details.
>>>
>>> @Iain the home page (http://gdcproject.org/wiki/Home) could need some
>>> small updates:
>>>
>>> Frontend version still says 2.059 and links to the 2.057 changelog.
>>>
>>> There are still some references to the old issue tracker:
>>> "A bug, proposal, or enhancement can go to the issue tracker on
>>> bitbucket."
>>> "This list is still maintained, however, new bugs should be submitted
>>> to the Bitbucket repository."
>>>
>>> And this should probably be changed to refer to git commits:
>>> "Include the hg changeset or commit you are using for GDC. (e.g. commit
>>> 114 or changset 6f03952ff48f)"
>>>
>>> If you give me permission to edit the home page (user JohannesPfau) I
>>> can fix those, if not that's fine as well ;-)
>>>
>>> BTW:
>>> Would it be possible to add links to the gdcproject.org main page,
>>> github repository, bug tracker and D.gnu forum to the wiki Quick links
>>> list?
>>
>>
>> Fixed them - mostly. I see a bit of spam has creeped in (oh noes!). This might take me an hour to clean out as I can't seem to remove pages in bulk.
>>
>> In the meantime, I have added some silly textcha's - so sorry for the inconvenience!
>>
>> I could certainly add you to an admin group if only I knew how. :-)
>>
>> Regards
>> Iain
>
>
> OK, worked out how to remove them in bulk. If anyone was zealous enough to create a page in their own name, I'm sorry but you've have your account removed. :P
Back online and finished last tweaks. By the way, how's the styling doing for you? I'm not really much of an eye for design...
Regards
Iain
|
August 23, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Sönke Ludwig | Am Wed, 22 Aug 2012 23:56:35 +0200
schrieb Sönke Ludwig <sludwig@outerproduct.org>:
> conftest.c:1:0: sorry, unimplemented: -mfloat-abi=hard and VFP
I've had this issue before. The armhf-triplet.diff patch (shipped with debian sources) wasn't applied for some reason. So something went wrong when running "debian/rules patch". In my case I had to install the "lsb-release" package. It's included in the "Installing packages" command on the wiki page though, but maybe you've overlooked it?
Anyway, you should run "debian/rules clean" and then "debian/rules patch" again and see if there's some suspicious output.
|
August 23, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Iain Buclaw | Am Thu, 23 Aug 2012 00:12:17 +0200 schrieb "Iain Buclaw" <ibuclaw@ubuntu.com>: > > Back online and finished last tweaks. Great, thanks! > By the way, how's the styling doing for you? I'm not really much of an eye for design... I think it's quite good. I don't really like the red text color in the 'code boxes', but everything else looks great. |
August 23, 2012 Re: Wiki updates | ||||
---|---|---|---|---|
| ||||
Posted in reply to Johannes Pfau | Am 23.08.2012 10:04, schrieb Johannes Pfau:
> Am Wed, 22 Aug 2012 23:56:35 +0200
> schrieb Sönke Ludwig <sludwig@outerproduct.org>:
>
>> conftest.c:1:0: sorry, unimplemented: -mfloat-abi=hard and VFP
>
> I've had this issue before. The armhf-triplet.diff patch (shipped with
> debian sources) wasn't applied for some reason. So something went wrong
> when running "debian/rules patch". In my case I had to install the
> "lsb-release" package. It's included in the "Installing packages"
> command on the wiki page though, but maybe you've overlooked it?
>
> Anyway, you should run "debian/rules clean" and then "debian/rules
> patch" again and see if there's some suspicious output.
>
OK it was the package 'quilt' that was missing. Also the regex did not work for me, I changed it to just '^4\.7$' and then the setup went ok. I'm now compiling again.
|
Copyright © 1999-2021 by the D Language Foundation